×
BigJimny Meet - 2020 (01 Nov 2019)


Its the big one! The 50th Anniversary of the Jimny.

17th May 2020

Parkwood (Tong - near Leeds)

£35

BOOKING OPEN - CLICK HERE TO BOOK

Event details are HERE

× A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Re:HELP! Clutch release arm spring

More
11 Nov 2019 23:00 - 11 Nov 2019 23:23 #215566 by gv42
Help! brother is replacing the clutch on his Jimny, when the spring that holds the clutch release arm broke, doesn't hold the arm now, anyone got one spare?!!

i think the part number is 23241-78A20-000

its a 2003 plate
Attachments:
Last edit: 11 Nov 2019 23:23 by gv42.

Please Log in or Create an account to join the conversation.

More
12 Nov 2019 18:11 #215578 by mlines
£4.21 plus £2.20 postage

Sent from my Pixel 2 XL using Tapatalk

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

More
14 Nov 2019 10:32 #215618 by gv42
Many thanks for the quick reply Martin!

The Suzuki Clutch kit comes with the Spigot/pilot bearing, and my brothers one was a bit notchy and loose, well worth checking and replacing when you do your clutch! as for the Fork release clip/spring, worth bearing in mind, might be something else that may need to be changed, when doing a clutch?


again, many thanks!


Mark

Please Log in or Create an account to join the conversation.

Time to create page: 0.101 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.