fluid changes capacitys gen 3 jimny

I all your probably sick of seeing my name by now but I am a newbie and want to learn
so having the jimny about a month now I want to look at changing most of the main fluids just to make sure its all done and peace of mind
i want to put decent oils in and make sure i have the correct grade and quantity so this is ware i need to be simple and nothing over the top
also in a list so lets have a go if I've missed anything please add to list and a difficulty in the job may be this can be helpful to other newbies


difficulty in job 1*= easy 5 * = hard job to be done oil needed grade etc quantity liters any special tools needed
make

engine oil and filter type

front diff

rear diff

transfer box

plugs



please can someone help fill this in or may have a link to these questions thanks john

Hi have a look on wiki top of the page all you need is there

No eBay APP ID and/or Cert ID defined in Kunena configurationOnly tool you will need for changing oils
Remember to undue the fill plugs first

to the OP...oil and filter is very easy to change. I removed the exhaust heat shield and coolant expansion tank for easier access to the oil filter. I used 10W-40 Castrol since I am in the tropics.

Do not omit flushing coolant and brake fluid as part of the over all service....see same wiki page for specs and advice on coolant type.
Cheers.

I every one thanks
just read posts
wife has had me painting all week so i am on and off forum
got to keep her sweet thanks john

Brownie points are the most valuable currency in the world

OP, I forgot to indicate that you should get the Suzuki OEM oil filter, I think I have seen them advertised here on this site.

When I went to get the oil and filter from the parts store, they were trying to sell me a Denso filter which was a bit shorter than the original. Shorter on an already short filter I think is not the way to go IMO.
I prefer a filter holding more volume of oil and more filtration surface area.
Cheers.

I agree

Are the quantities of oil for the diffs and transfer box there on the wiki pages as I was thinking of doing these changes myself and did not notice the quantities required?

Paul