BigJimnyMeet (North) 2024 (12 Jan 2024)
14th July 2024
Parkwood Nr. Leeds
Click HERE for details
Rear disc brakes - poor wear pattern?
As part of my rebuild I have put on another kit, all parts brand new including disks, calipers, pads and pipework. I have now done 200 miles ON ROAD ONLY and I am seeing this poor wear pattern.
For reference, I also completely changed the front, again with new disks, calipers and pads and the wear pattern on the fronts seems perfect.
Any ideas?
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
- Posts: 1936
- Thank you received: 554
- Points: 7523.00
J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp
Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...
www.youtube.com/user/riclemus
Please Log in or Create an account to join the conversation.
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
- Posts: 3727
- Thank you received: 923
- Points: 9981.00
Do the still ship them with thin (2mm?) spacer shims that slip over the studs behind the disk?
Please Log in or Create an account to join the conversation.
Yes, same kit and does come with the shims. Maybe I am expecting to much?S200KYS wrote: Mine with the same kit I believe?
Do the still ship them with thin (2mm?) spacer shims that slip over the studs behind the disk?
Sent from my Pixel 2 XL using Tapatalk
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
- Posts: 1936
- Thank you received: 554
- Points: 7523.00
mlines wrote: Riccy, not sure I understand? It looks like they are not coming on rather that sticking?
sorry, i see what you mean. Daves post makes more sense. will have a look at mine now and see
J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp
Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...
www.youtube.com/user/riclemus
Please Log in or Create an account to join the conversation.
Sent from my Pixel 2 XL using Tapatalk
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
- TomDK
- Visitor
-
Public
I think this is to ecpect when using the Jimny for offroading.
A quick fix is to remove the pads and run them over some sandpaper on a flat surface a few times.
Please Log in or Create an account to join the conversation.
- Posts: 3727
- Thank you received: 923
- Points: 9981.00
Best refer to the supplier and seek their thoughts?
Were the callipers new or used? If used have you greased the sliders?
Please Log in or Create an account to join the conversation.
The inside of the rear (pictured) has shiny on the outer part of the face of the disk and corrosion in the inner part of the face. The outside of the rear (NOT PICTURED) has corrosion on the outside part of the face and shiny on the inside part, ie the opposite pattern.
All parts were brand new 200 miles ago
I will have to pop the wheel off for a better look, particularly at the pads themselves
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
- Posts: 8814
- Thank you received: 1761
- Points: 36277.00
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Please Log in or Create an account to join the conversation.