×
BigJimnyMeet (North) 2024 (12 Jan 2024)
BigJimnyMeet 2024
14th July 2024
Parkwood Nr. Leeds
14th July 2024
Parkwood Nr. Leeds
Booking now open - Discount for additional vehicles
Click HERE for details
Click HERE for details
×
A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
M13a engine valve shim tool
31 Mar 2016 06:59 #164681
by facade
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Replied by facade on topic M13a engine valve shim tool
There are 3 different claw like brackets that screw on the cam carriers and push the buckets down.
If I ever get a round tuit (my nan had one on top of her fireplace) I thought I'd just struggle or cobble something up.
AFAIK, there are no after market ones, as no-one ever messes with them.
(bad really, I'd expect the gaps to close up as the valves wear into the seats on Tesco petrol, but it needs an expensive gasket and seals just to look at them)
If I ever get a round tuit (my nan had one on top of her fireplace) I thought I'd just struggle or cobble something up.
AFAIK, there are no after market ones, as no-one ever messes with them.
(bad really, I'd expect the gaps to close up as the valves wear into the seats on Tesco petrol, but it needs an expensive gasket and seals just to look at them)
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Please Log in or Create an account to join the conversation.
31 Mar 2016 07:53 #164686
by Daniel30
I'd leave that until the just in case bit is needed
Replied by Daniel30 on topic M13a engine valve shim tool
skywalker65 wrote: Ey up all,
Fancy getting the valve adjustment shim tool for my toolkit just in case lol. Anyone got one for sale or know of an alternative other than Suzuki ?
Anyone know the part number of the tool and a rough cost?
Ta
I'd leave that until the just in case bit is needed
Please Log in or Create an account to join the conversation.
Time to create page: 0.098 seconds