4wd low not working

Leathery1 wrote: so long as all wheels are in a straight line and you aren't going too fast for 4L.

your not meant to select 4L when the vehicles in motion,clearly states that in the manual and on the back of the sun visor!! Going from 2h to 4h is fine upto 60mph aslong as the wheels are straight.

jonesyba420 wrote:

Leathery1 wrote: so long as all wheels are in a straight line and you aren't going too fast for 4L.

your not meant to select 4L when the vehicles in motion,clearly states that in the manual and on the back of the sun visor!! Going from 2h to 4h is fine upto 60mph aslong as the wheels are straight.

It's one of the many reasons I jump back in the Pajero as soon as I get the chance.

as is written in the Jimny Manual

- front wheels pointing straight ahead
- complete standstill
- depress the clutch pedal fully (or it won't work)

if the light continues blinking try moving the vehicle slowly back and forth a few feet while the 4L light blinks

and if it still doesn't work, I'll be popping over to Hastiekids

Halford wrote: as is written in the Jimny Manual

- front wheels pointing straight ahead
- complete standstill
- depress the clutch pedal fully (or it won't work)

What happens if you don't have a clutch??

I would imagine you put the selector in N (assuming you wanted a serious answer ) and there will be an input to the ecu from the auto gearbox.

Thanks for all the advice guys,special thanks must go to Ian as lot of good tips there re the transfer box. Didn't manage to get online last night or would have posted to say I got it working on Fri morning so probably a dodgy connection. First chance I get I'll get underneath and check them out.

what was the cure as mine is doing the same thing goes in to 4wd perfect but just flashes and beeps when trying to go in 4wdl