×
BigJimnyMeet (North) 2024 (12 Jan 2024)


BigJimnyMeet 2024

14th July 2024
Parkwood Nr. Leeds

Booking now open - Discount for additional vehicles

Click HERE for details

× A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

cam belts

More
27 Nov 2009 11:43 #1532 by ronm
cam belts was created by ronm
My Jimny is a 2001 jlx softop y reg just coming to 43000miles and have had from 7000miles so into new cam belt territory!!!What engine no determines if rubber belt or bicycle chain!! and where do you locate the engine no?



Ronm

Please Log in or Create an account to join the conversation.

More
27 Nov 2009 16:16 #1534 by mlines
Replied by mlines on topic Re:cam belts
G13BB is the Cambelt engine, part no ADK87305

www.camskill.co.uk/products.php?plid=m30b885s3015p45780

M13AA is the chain driven engine, no replacement required

Look on the VIN plate, if your VIN Number has JB33 in it then its a G13BB engine, if it has JB43 in it then is an M13AA engine.

And take a look at the engine...if it looks like this then its an M13AA



Martin

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

More
28 Nov 2009 11:41 #1540 by ronm
Replied by ronm on topic Re:cam belts
Thanks for your prompt reply Martin

Checked out JB33 elastic band I fear.

Price on that site is not bad having paid considerably more on other cars.

Have you ever fitted one?

Can it be done with Rad in situ

Ronm

Please Log in or Create an account to join the conversation.

  • funkyjimny
  • funkyjimny's Avatar
  • Offline
  • Moderator
  • Moderator
    Registered
  • 2004 jimny soft top, factory hardtop, ARB bumper
More
28 Nov 2009 18:11 #1544 by funkyjimny
Replied by funkyjimny on topic Re:cam belts
Easier to take the rad out, comes out very easily, theres a drain plug on the o/s bottom of the radiator, undo the hoses, undo 2 screws at the top and wiggle it out. remove viscous fan - pig if i remember, then remove the alternator and PS pump belts, cover off, new belt on and refitting is the reverse, just remember to put some anti- freeze in. my belt was £14 if i remember rightly.

Gary

Please Log in or Create an account to join the conversation.

More
29 Nov 2009 10:26 #1547 by ronm
Replied by ronm on topic Re:cam belts
Cheers Gary

Nlimey where did you get a belt that cheap!!!!


Ronm

Please Log in or Create an account to join the conversation.

  • funkyjimny
  • funkyjimny's Avatar
  • Offline
  • Moderator
  • Moderator
    Registered
  • 2004 jimny soft top, factory hardtop, ARB bumper
More
29 Nov 2009 10:33 #1548 by funkyjimny
Replied by funkyjimny on topic Re:cam belts
mate owns a garage lol.

Please Log in or Create an account to join the conversation.

More
29 Nov 2009 10:40 #1549 by ronm
Replied by ronm on topic Re:cam belts
cant top that one

Ronm

Please Log in or Create an account to join the conversation.

  • funkyjimny
  • funkyjimny's Avatar
  • Offline
  • Moderator
  • Moderator
    Registered
  • 2004 jimny soft top, factory hardtop, ARB bumper
More
29 Nov 2009 11:56 - 29 Nov 2009 11:57 #1551 by funkyjimny
Replied by funkyjimny on topic Re:cam belts
Yeah its great mostof the time, but i find my jobs always get pushed to the back of the queue when hehas other work in, I have a TD5 discovery too, and its been in time and again for a slow puncture, 3 years its been like that... had to fix it myself in the end, and then my mate confessed he knew it had a little screw in it but he'd always been too busy. :dry:
BUT, it was great when i built up my latest jimny, i had a part built challenge truck project pick up thing on 33's and a std jimny hardtop next to each other at mates garage inside, and swapped all the parts over (axles/engine/box/rocklobster t case/locker/rear disc kit etc) and got it ready for its MOT, total cost £34 lol B)
Last edit: 29 Nov 2009 11:57 by funkyjimny.

Please Log in or Create an account to join the conversation.

Time to create page: 0.134 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.

We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.