×
BigJimnyMeet (North) 2024 (12 Jan 2024)


BigJimnyMeet 2024

14th July 2024
Parkwood Nr. Leeds

Booking now open - EARLY BIRD DISCOUNTED PRICE

Click HERE for details

× A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

4wd vacum hose set up

More
22 Aug 2008 07:48 - 22 Aug 2008 07:49 #118 by Asbojimny
As mentioned before. Ripped out all the vacum hoses the other weekend from underneath Asbo. Including the metal pipes that run along radius arms. Does anyone ( martin :laugh: ) have a diagram of where everything should be. Looked through the jimny file i downloaded but cant find anything:(

ps. Going off roadin tmrw:ohmy:

Cheers.

scottishmudclub.com
Last edit: 22 Aug 2008 07:49 by Asbojimny.

Please Log in or Create an account to join the conversation.

More
22 Aug 2008 09:29 - 22 Aug 2008 09:32 #120 by mlines
Replied by mlines on topic Re:4wd vacum hose set up
The wires that run along the radius arms are for the ABS system as far as I know. The vacuum tubes come along the axles. This is the best overall diagram I have.



Here is a higher resolution version attached

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Attachments:
Last edit: 22 Aug 2008 09:32 by mlines.

Please Log in or Create an account to join the conversation.

More
22 Aug 2008 09:47 - 22 Aug 2008 09:49 #121 by mlines
Replied by mlines on topic Re:4wd vacum hose set up
Ok - failed to attach - here is another go

Attachment vacuum.doc not found


Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Attachments:
Last edit: 22 Aug 2008 09:49 by mlines.

Please Log in or Create an account to join the conversation.

More
22 Aug 2008 11:33 #122 by Asbojimny
Replied by Asbojimny on topic Re:4wd vacum hose set up
Cheers for that. Knew you'd have it. Think it shows the hose/pipe running along the radius arm just before it heads up the way. We're going to re route it so they keep out the way.

scottishmudclub.com

Please Log in or Create an account to join the conversation.

Time to create page: 0.106 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.

We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.