×
Fully Floating Rear Axle Kit (20 Oct 2021)

Brett and Riccy are please to announce the

G&D Floating Axle Kit

This add-in kit enables you to enhance your Gen3 Jimny to a fully floating rear axle

Full details are in the download file below

DOWNLOAD DETAILS HERE

File Attachment:

× A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the
logo.

Inflating assist

  • Lambert
  • Lambert's Avatar Topic Author
  • Offline
  • Moderator
  • Moderator
    Registered
  • The quickest Jimny in Harrogate...(that I own)
More
11 Sep 2021 15:04 #238470 by Lambert
Replied by Lambert on topic Inflating assist
Show off, mine is only a 25l which makes it portable to a point but not exactly edc.

Temeraire (2018 quasar grey automatic)
The last of the gen3s, probably.

Please Log in or Create an account to join the conversation.

  • Riccy
  • Riccy's Avatar
  • Away
  • Banned
  • Banned
    Registered
  • J999 MNY Bashing around Carlisle
More
11 Sep 2021 15:10 #238472 by Riccy
Replied by Riccy on topic Inflating assist
Ive got an ARB as in the link below with the airline kit and tank. The twin one with the tank is a bit overkill and expensive, but the single one is just as capable.

I fitted some push fit airline connections to the fittings to allow me to mount the tank under the chassis rear and put the airline socket on the back bumper. I also fitted a 12v airline solenoid to allow me to switch off the tank/airline socket when not needed.


J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp

Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...

www.youtube.com/user/riclemus
The following user(s) said Thank You: Lambert

Please Log in or Create an account to join the conversation.

  • Lambert
  • Lambert's Avatar Topic Author
  • Offline
  • Moderator
  • Moderator
    Registered
  • The quickest Jimny in Harrogate...(that I own)
More
11 Sep 2021 15:15 #238474 by Lambert
Replied by Lambert on topic Inflating assist
Total overkill for what I need. Very cool but not for me.

Temeraire (2018 quasar grey automatic)
The last of the gen3s, probably.

Please Log in or Create an account to join the conversation.

More
11 Sep 2021 15:35 #238477 by Soeley
Replied by Soeley on topic Inflating assist

Show off, mine is only a 25l which makes it portable to a point but not exactly edc.

Your previous reply makes more sense now 

I have recently bought the  T-Max  portable compressor as last time I was out the small plug in one I had blew the power socket fuse on the fourth tyre when re-airing.
The following user(s) said Thank You: Lambert

Please Log in or Create an account to join the conversation.

Time to create page: 1.429 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.

We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.