×
BigJimnyMeet (North) 2024 (12 Jan 2024)
BigJimnyMeet 2024
14th July 2024
Parkwood Nr. Leeds
14th July 2024
Parkwood Nr. Leeds
Booking now open - EARLY BIRD DISCOUNTED PRICE
Click HERE for details
Click HERE for details
×
A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
Where yo get the cone washers ?
- Cutler
- Topic Author
- Visitor
-
Public
05 Dec 2020 12:55 #230679
by Cutler
Where yo get the cone washers ? was created by Cutler
Hi, so I have avm manual hubs and before I put these on there is Alan bolts which have/had cone shape washers on where could I find these washers or could I make something similar or do I even need them at all as most of them had dissolved anyway I will attach a photo as this was very vague
Please Log in or Create an account to join the conversation.
- Roger Fairclough
- Offline
- Platinum Member
-
Registered
Less
More
- Posts: 1389
- Thank you received: 193
- Points: 7457.00
05 Dec 2020 13:24 #230680
by Roger Fairclough
Replied by Roger Fairclough on topic Where yo get the cone washers ?
Yes, you do need them as they correctly locate the AVM hubs to the hub body. They will be standard Suzuki parts or maybe Martin stocks them.
Roger
Roger
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 8787
- Thank you received: 1755
- Points: 36118.00
05 Dec 2020 13:37 #230682
by Lambert
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Replied by Lambert on topic Where yo get the cone washers ?
I got mine from America via ebay as the avm ones were powered metal and quite fragile the American ones appear to be actually machined.
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Please Log in or Create an account to join the conversation.
- Cutler
- Topic Author
- Visitor
-
Public
05 Dec 2020 13:53 #230684
by Cutler
Replied by Cutler on topic Where yo get the cone washers ?
Thank you I will try Suzuki as I can’t seem to find any online that specify they’re for the jimny. Thanks guys
Please Log in or Create an account to join the conversation.
- Roger Fairclough
- Offline
- Platinum Member
-
Registered
Less
More
- Posts: 1389
- Thank you received: 193
- Points: 7457.00
05 Dec 2020 14:23 #230687
by Roger Fairclough
Replied by Roger Fairclough on topic Where yo get the cone washers ?
You could try Rough Trax, they are near Bristol. They specialise in Toyota but to my knowledge the cone washers are the same for Toyota and Suzuki. The Rough Trax items are complete with stud cone, nut and lock washer.
Roger
Roger
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 8787
- Thank you received: 1755
- Points: 36118.00
05 Dec 2020 16:10 #230688
by Lambert
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Replied by Lambert on topic Where yo get the cone washers ?
I thought that and ordered the Toyota ones. They're m10 the Suzuki on the other hand are m6.
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Please Log in or Create an account to join the conversation.
- Sergiu
- Visitor
-
Public
06 Dec 2020 07:26 #230706
by Sergiu
Replied by Sergiu on topic Where yo get the cone washers ?
The cone washers are the same as the Toyota ones, but it depends on the Toyota model, while the hub bolts on all Suzuki models are M8, Toyota used 2 different sizes: M8 for Land Cruisers with 6 wheel studs and M10 for Land Cruisers with 5 wheel studs.
I attached a photo for exemplification, on the left is the genuine Suzuki cone washer, on the right is the aftermarket Toyota one and they are both identical. I think the Toyota ones are a bit easier to find and a bit cheaper.
I attached a photo for exemplification, on the left is the genuine Suzuki cone washer, on the right is the aftermarket Toyota one and they are both identical. I think the Toyota ones are a bit easier to find and a bit cheaper.
Attachments:
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 8787
- Thank you received: 1755
- Points: 36118.00
06 Dec 2020 07:51 #230708
by Lambert
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Replied by Lambert on topic Where yo get the cone washers ?
Yeah m8 not m6 .fat thumbs and a phone keyboard.
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Please Log in or Create an account to join the conversation.
- Gilling Red
- Visitor
-
Public
06 Dec 2020 09:06 #230711
by Gilling Red
Replied by Gilling Red on topic Where yo get the cone washers ?
Look very crude, could knock them up in 10 mins on my lathe ! Is it a straight M8 bore ?
Please Log in or Create an account to join the conversation.
- Sergiu
- Visitor
-
Public
07 Dec 2020 08:32 #230727
by Sergiu
Replied by Sergiu on topic Where yo get the cone washers ?
@Gilling Red, yes, the bore is straight M8.
@Cutler, can you share a photo with the AVM hubs you have? So far the ones I saw from AVM did not require any cone washers to fit them, only the factory Suzuki manual hubs require the cone washers.
@Cutler, can you share a photo with the AVM hubs you have? So far the ones I saw from AVM did not require any cone washers to fit them, only the factory Suzuki manual hubs require the cone washers.
Please Log in or Create an account to join the conversation.
- Cutler
- Topic Author
- Visitor
-
Public
07 Dec 2020 21:06 #230744
by Cutler
Replied by Cutler on topic Where yo get the cone washers ?
Hi, I have Manual locking hubs that are avm and beneath this is where I require the cone washers I will attach photos
Please Log in or Create an account to join the conversation.
Time to create page: 0.157 seconds