BigJimny Meet 2019 (17 May 2019)

BigJimny Meet and off-road driving day


See HERE for details - See HERE for discussion

× A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the

Electric transfer case replaced with Manual

  • Posts: 1
  • Thank you received: 0
  • Points: 1.00
14 Mar 2019 19:43 #204595 by Khanmalghani
Hello, i need help, i changed my electronic transfer case on jimny with old manual transfer case and done some wiring from mechanic to get 4x4 working,, before this change my jimny goes On 80 on 3000rpm and touch 120kmh on 4000rpm..after this change it stuck on 70kmh on 3000rpm and touch 100kmh on 4000rpm..what can be the problem . Needed help

Please Log in or Create an account to join the conversation.

  • Lambert
  • Lambert's Avatar
  • Offline
  • Moderator
  • Moderator
  • The quickest Jimny in Harrogate...(that I own)
  • Posts: 3855
  • Thank you received: 605
  • Points: 5518.00
  • Gen 3 Jimny GV (2010) Gen 3 Jimny
14 Mar 2019 20:06 #204598 by Lambert
Welcome to the forum. The problem is that the electronic transfer box is a direct 1:1 drive in high range whereas the manual transfer box is a 1.3:1 reduction in high range. There are 3 options. Live with it. Fit the older matching differentials from the donor vehicle. Or fit larger tyres specifically tyres with a diameter around 31 inches.

Dreadnaught (black 2011)

Please Log in or Create an account to join the conversation.

Moderators: funkyjimnyooky_123
Time to create page: 0.089 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.