×
BigJimnyMeet (North) 2024 (12 Jan 2024)


BigJimnyMeet 2024

14th July 2024
Parkwood Nr. Leeds

Booking now open - EARLY BIRD DISCOUNTED PRICE

Click HERE for details

× A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the
logo.

Raptor manual hubs ?

More
16 May 2017 14:36 #181272 by Halford
Raptor manual hubs ? was created by Halford
No eBay APP ID and/or Cert ID defined in Kunena configurationany one used these, are they any good ?





?????
:huh:
Attachments:

Please Log in or Create an account to join the conversation.

  • Riccy
  • Riccy's Avatar
  • Offline
  • Banned
  • Banned
    Registered
  • J999 MNY Bashing around Carlisle
More
16 May 2017 17:48 #181275 by Riccy
Replied by Riccy on topic Raptor manual hubs ?
They look remarkably similar to the cheaper ones jimnybits sell, Not tried them however so no great help to you!

Riccy

J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp

Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...

www.youtube.com/user/riclemus

Please Log in or Create an account to join the conversation.

More
16 May 2017 19:10 #181278 by Jezz
Replied by Jezz on topic Raptor manual hubs ?
I think there is a capitol C missing , but i could be wrong ?

It's been fettled just a tad.

Please Log in or Create an account to join the conversation.

  • Mraz
  • Visitor
  • Visitor
    Public
16 May 2017 19:45 #181280 by Mraz
Replied by Mraz on topic Raptor manual hubs ?
For that price I'd just go with AVM Reinforced hubs.

Please Log in or Create an account to join the conversation.

More
16 May 2017 20:02 #181285 by jackonlyjack

Please Log in or Create an account to join the conversation.

More
16 May 2017 23:18 #181290 by Keithy
Replied by Keithy on topic Raptor manual hubs ?

Jezz wrote: I think there is a capitol C missing , but i could be wrong ?

Thought I'd seen the C on those earlier too.....probably work but then they could be made of cheese?

Please Log in or Create an account to join the conversation.

  • Lambert
  • Lambert's Avatar
  • Offline
  • Moderator
  • Moderator
    Registered
  • The quickest Jimny in Harrogate...(that I own)
More
17 May 2017 04:17 #181291 by Lambert
Replied by Lambert on topic Raptor manual hubs ?
I would be worried that they are not rebranded avm as much as chineseium copies. There is a good resemblance to the avm ones more so the off brand ones but I would be inclined to agree with the above comments and put a little more in the kitty and get real avm ones and be confident in them.

Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
The following user(s) said Thank You: Josh101

Please Log in or Create an account to join the conversation.

More
17 May 2017 09:52 #181293 by Halford
Replied by Halford on topic Raptor manual hubs ?
Thanks everyone for input

just ordered genuine AVM's from Jimnybits

;)

Please Log in or Create an account to join the conversation.

  • Daniel30
  • Visitor
  • Visitor
    Public
17 May 2017 13:00 #181298 by Daniel30
Replied by Daniel30 on topic Raptor manual hubs ?
So is the jimny staying now then Halford??

Please Log in or Create an account to join the conversation.

More
17 May 2017 16:14 #181304 by Halford
Replied by Halford on topic Raptor manual hubs ?

Daniel30 wrote: So is the jimny staying now then Halford??

not sure yet shall decide over the next couple of weeks

but have bought a new "old dog taxi" :woohoo:

better for the old dog and the old Halford




£700 bargain
sooo comfy eats up the miles, 49 mpg and 4wd
;)
Attachments:

Please Log in or Create an account to join the conversation.

  • Daniel30
  • Visitor
  • Visitor
    Public
17 May 2017 16:21 #181306 by Daniel30
Replied by Daniel30 on topic Raptor manual hubs ?
Looks good and more practical for your needs mate B)
700 smackers sounds good.

Please Log in or Create an account to join the conversation.

More
18 May 2017 08:33 #181312 by Keithy
Replied by Keithy on topic Raptor manual hubs ?
At £700 it'd have been rude not to.....nice looking too!

Please Log in or Create an account to join the conversation.

Time to create page: 0.188 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.

We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.