×
BigJimnyMeet (North) 2024 (12 Jan 2024)


BigJimnyMeet 2024

14th July 2024
Parkwood Nr. Leeds

Booking now open - Discount for additional vehicles

Click HERE for details

× A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the
logo.

oily leak from front nearside - advice requested

More
25 Jul 2016 18:45 #170513 by gusthegorilla
IRWIN. ....1 NUTS. .....0

Same old story..... :whistle: :whistle:


I'm planning to live forever.....so far, so good !!

Please Log in or Create an account to join the conversation.

  • mickt
  • Visitor
  • Visitor
    Public
25 Jul 2016 20:09 - 25 Jul 2016 20:11 #170522 by mickt
If your car is right hand drive then offside is drivers side is right side. The track rod ends come as both lh thread and rh thread and there are 4 of them as there are the front and aft rods.
Last edit: 25 Jul 2016 20:11 by mickt.

Please Log in or Create an account to join the conversation.

  • slippy
  • Visitor
  • Visitor
    Public
26 Jul 2016 05:44 #170532 by slippy
OOOPs got that the wrong way around. The descriptions mention right for the passenger side and left for the drivers side. That is the confusing bit.
Yes my car (the wife's car actually) is UK registered RHD.

Please Log in or Create an account to join the conversation.

  • tuppiesfriend
  • Visitor
  • Visitor
    Public
26 Jul 2016 08:14 #170535 by tuppiesfriend
Replied by tuppiesfriend on topic oily leak from front nearside - advice requested
Hi There,
Good hear you got the bolts out! Having done both sides on our Jimny, I noticed a difference, the first side (nearside) the CV joint was clean hardly any grease, didn't take too much notice though, was anxious to get it back, this was the side that was leaking axle oil. The other side, loads of grease on the CV joint, my conclusion is the gear oil leaking into the CV housing had washed all the grease off, I am now worried I should have applied grease, but as I am limited to 3,000 mile (insurance) I think I can put off stripping it down again for a while anyway. So advise is check it whilst it's out, Martin Lines did something about the amount of grease that should be applied.
Interesting info on the copperslip, I know of a Land Rover that may never come apart again, the one I sold to buy the Jimny!!!
Tuppiesfriend

Please Log in or Create an account to join the conversation.

Time to create page: 0.105 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.

We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.