×
BigJimnyMeet (North) 2024 (12 Jan 2024)


BigJimnyMeet 2024

14th July 2024
Parkwood Nr. Leeds

Booking now open - EARLY BIRD DISCOUNTED PRICE

Click HERE for details

× Are you building a Mud Monster or a Pavement Princess??
If so you can have your own thread in this section.
This section on other websites has led to arguments and contention. People are posting pictures of their pride and joy and therefore CONSTRUCTIVE comments only please!

Tread Lightly

More
15 May 2020 23:03 - 15 May 2020 23:14 #222293 by sniper
Replied by sniper on topic Tread Lightly

sniper wrote: Luckily for Reece, we can show that the cage was welded off the car and he will only need to qualify in "flat rotated".... 2G in ASME if I remember correctly... I have had a couple of rums so it could be 46G for all the use my memory is..... no uphill or overhead, 9pm past midnight to 3pm...

No pressure Reece....... not a full coding just a BSI standard.....

sniper


9pm -12pm - 3am, told you I'd had a few..... Still not right... 9pm to 12pm uphill - 3am to 12pm uphill, joining them covers flat... I think.... hic.

sniper
Last edit: 15 May 2020 23:14 by sniper.

Please Log in or Create an account to join the conversation.

  • Riccy
  • Riccy's Avatar
  • Offline
  • Banned
  • Banned
    Registered
  • J999 MNY Bashing around Carlisle
More
16 May 2020 06:20 #222299 by Riccy
Replied by Riccy on topic Tread Lightly
Thats looking good mate, will be indestructible! B)

J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp

Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...

www.youtube.com/user/riclemus
The following user(s) said Thank You: sniper

Please Log in or Create an account to join the conversation.

  • Lambert
  • Lambert's Avatar
  • Offline
  • Moderator
  • Moderator
    Registered
  • The quickest Jimny in Harrogate...(that I own)
More
16 May 2020 06:40 #222301 by Lambert
Replied by Lambert on topic Tread Lightly
Is that part of a nuclear reactor, that level of preparation is quite astounding compared to some of the other cages I have seen being built. Straight through inspection no worries!

Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
The following user(s) said Thank You: sniper

Please Log in or Create an account to join the conversation.

More
16 May 2020 11:13 #222320 by sniper
Replied by sniper on topic Tread Lightly

Lambert wrote: Is that part of a nuclear reactor, that level of preparation is quite astounding compared to some of the other cages I have seen being built. Straight through inspection no worries!


It will look like it deserves nuclear power :laugh: :laugh: :laugh: Maybe a 1600 in the near future, if I can sway favour with the finance fhurer....

The only concerns over inspection are based more on the design (my problem) than the quality of the work. Blue book dictates a few must haves but you do have quite a lot of room to design within the guidelines.... Watch me get it wrong now.....

sniper

Please Log in or Create an account to join the conversation.

More
16 May 2020 15:01 #222331 by sniper
Replied by sniper on topic Tread Lightly
Most of the cage work complete. Mounting lights, number plate and wheel arches as we speak.....







You can just see the cross chassis bar and the two bars either side of the spare wheel, which have been added today. It looks like the back end of a quad bike......

Very happy with how it is progressing......

sniper
Attachments:

Please Log in or Create an account to join the conversation.

More
17 May 2020 08:09 #222368 by sniper
Replied by sniper on topic Tread Lightly
Nearing the final layout.....



A useable load bed, it will carry a 30ltr screw top drum with all the recovery junk in it, when out on lanes or trialing. Somewhere to rest a drink and a bag of chips when I'm being sociable. Might fix some cargo net across the whole bed.

Reece is a very handy lad, never having fitted a cage and turning work of this standard out, quite a craftsman. I think the arches will test him, one of those things that you need to almost hold in position and cut at the same time....

sniper
Attachments:

Please Log in or Create an account to join the conversation.

More
17 May 2020 10:05 #222382 by jackonlyjack
Replied by jackonlyjack on topic Tread Lightly
Looks fantastic matey :)
You don't need rear arches........leave it exposed :evil:
Then at least you can pay me back from all the times following mine :whistle:
On the plus side nobody ever tail gates my jimny.......and if they try i just move off line :angry:
The following user(s) said Thank You: sniper

Please Log in or Create an account to join the conversation.

More
17 May 2020 10:16 #222384 by Jimny Dr
Replied by Jimny Dr on topic Tread Lightly
hi guys
to be fair, me and reece said the same regards leaving the arches exposed as the top and front are closed in by nature of the cage.
perhaps a longish, hanging mud flap from the rear of the cage would look good when the chassis has been shortened??? if that makes sense,
and leaves room for bigger tyres later.
but we work to the customers choice at the end of the day
room for thought sniper???
the doc
The following user(s) said Thank You: sniper

Please Log in or Create an account to join the conversation.

More
17 May 2020 10:21 #222385 by jackonlyjack
Replied by jackonlyjack on topic Tread Lightly
Yes half of arch just to protect the rear cab from damage ;)
The following user(s) said Thank You: sniper

Please Log in or Create an account to join the conversation.

More
17 May 2020 10:28 #222386 by sniper
Replied by sniper on topic Tread Lightly

jackonlyjack wrote: Looks fantastic matey :)
You don't need rear arches........leave it exposed :evil:
Then at least you can pay me back from all the times following mine :whistle:
On the plus side nobody ever tail gates my jimny.......and if they try i just move off line :angry:


I quite like the look of the exposed wheels, they will chuck water everywhere though, as you say....

sniper

Please Log in or Create an account to join the conversation.

More
17 May 2020 10:35 #222387 by sniper
Replied by sniper on topic Tread Lightly

Jimny Dr wrote: hi guys
to be fair, me and reece said the same regards leaving the arches exposed as the top and front are closed in by nature of the cage.
perhaps a longish, hanging mud flap from the rear of the cage would look good when the chassis has been shortened??? if that makes sense,
and leaves room for bigger tyres later.
but we work to the customers choice at the end of the day
room for thought sniper???
the doc


Yes Doc, room for thought......

How would we protect the back of the cab ?

Does the tray cover the tread ?

The look or style of the exposed wheel is ok with me but I would like to trim an arch roughly and render it up, just to be sure.....

Cracking work from you guys again...

sniper

Please Log in or Create an account to join the conversation.

More
17 May 2020 10:41 #222388 by jackonlyjack
Replied by jackonlyjack on topic Tread Lightly
Like Doc says you could have some sort of rallye flaps
Make them quick release.....fit them with a long pin
Like pulling the pin out of a door hinge.one part stays with body other with the flap
B)
The following user(s) said Thank You: sniper

Please Log in or Create an account to join the conversation.

Time to create page: 0.195 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.

We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.