Tell us about your Jimny and post some pictures! Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

My Jimny

  • renard38
  • Visitor
  • Visitor
    Public
28 Jun 2013 17:33 #75397 by renard38
Replied by renard38 on topic My Jimny (Teesside)
these tyres are better B)

Please Log in or Create an account to join the conversation.

  • danstangoe
  • Topic Author
  • Visitor
  • Visitor
    Public
03 Jul 2013 17:51 #75966 by danstangoe
Replied by danstangoe on topic My Jimny (Teesside)
Had a right nightmare whilst fitting me locking hubs, got one side on and found my alloys would not fit over them :( so spent an hour hacking one of my alloys to bits to get them to fit!
[IMG
[IMG
[IMG
[IMG


Im going to sand them so they look right then have them painted when my other tyres come to get fitted!

Sent from my GT-I9505 using Tapatalk 2

Please Log in or Create an account to join the conversation.

  • JuanGuillie
  • Visitor
  • Visitor
    Public
03 Jul 2013 21:05 - 06 Jul 2013 14:17 #76010 by JuanGuillie
Replied by JuanGuillie on topic My Jimny (Teesside)
:woohoo: :woohoo: :woohoo:

I think your alloy's lost a lot of strenght there !
Could be dangerous under extreme torque going on a bumpy steep slope !
Take care !!!
Last edit: 06 Jul 2013 14:17 by JuanGuillie.

Please Log in or Create an account to join the conversation.

  • danstangoe
  • Topic Author
  • Visitor
  • Visitor
    Public
03 Jul 2013 22:49 #76046 by danstangoe
Replied by danstangoe on topic My Jimny (Teesside)
I dont think so, it was a thin piece of alloy that capped the centre that the hubs sit in!

Sent from my GT-I9505 using Tapatalk 2

Please Log in or Create an account to join the conversation.

  • Northern-Wanderer
  • Visitor
  • Visitor
    Public
03 Jul 2013 23:12 #76053 by Northern-Wanderer
Replied by Northern-Wanderer on topic My Jimny (Teesside)
I have got to agree with JUAN,If you just go offroad you might get away with it,but on the road you are asking for trouble.

Please Log in or Create an account to join the conversation.

  • danstangoe
  • Topic Author
  • Visitor
  • Visitor
    Public
04 Jul 2013 07:35 #76070 by danstangoe
Replied by danstangoe on topic My Jimny (Teesside)
Ill get a better pic sometime but the pic makes it look as though ive cut the recess where the wheel nuts sit in when i havent, all ive done is opened up where the centre cap pops in

Please Log in or Create an account to join the conversation.

  • danstangoe
  • Topic Author
  • Visitor
  • Visitor
    Public
04 Jul 2013 10:29 #76086 by danstangoe
Replied by danstangoe on topic My Jimny (Teesside)
As you can see, its about 3mm wide and a cm in width, just cosmetic as far as im concered. You can say I told you so if my wheel falls off though lol

[IMG

Please Log in or Create an account to join the conversation.

  • danstangoe
  • Topic Author
  • Visitor
  • Visitor
    Public
06 Jul 2013 11:04 #76271 by danstangoe
Replied by danstangoe on topic My Jimny (Teesside)
[IMG


Sent from my GT-I9505 using Tapatalk 2

Please Log in or Create an account to join the conversation.

  • JuanGuillie
  • Visitor
  • Visitor
    Public
06 Jul 2013 14:22 #76281 by JuanGuillie
Replied by JuanGuillie on topic My Jimny (Teesside)

danstangoe wrote: You can say I told you so if my wheel falls off though lol

I rather wouldn't want to say such things :)
If i were you i should check it up from time to time, looking after tiny hairline cracks.
:cheer:

Please Log in or Create an account to join the conversation.

  • danstangoe
  • Topic Author
  • Visitor
  • Visitor
    Public
09 Jul 2013 10:34 #76518 by danstangoe
Replied by danstangoe on topic My Jimny (Teesside)
Yeh I will be :)
Ive just put one if my new tyres on my spare so I can trim the arches so they wheels fit straight on with no fuss

[IMG

Please Log in or Create an account to join the conversation.

  • suzuki jimny fella
  • Visitor
  • Visitor
    Public
09 Jul 2013 20:07 #76546 by suzuki jimny fella
Replied by suzuki jimny fella on topic My Jimny (Teesside)
what size are they fella

Please Log in or Create an account to join the conversation.

  • danstangoe
  • Topic Author
  • Visitor
  • Visitor
    Public
09 Jul 2013 20:32 - 09 Jul 2013 20:34 #76551 by danstangoe
Replied by danstangoe on topic My Jimny (Teesside)
235/75 15
Last edit: 09 Jul 2013 20:34 by danstangoe.

Please Log in or Create an account to join the conversation.

Time to create page: 0.166 seconds
Joomla template by a4joomla