A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Re:Re:Front wheel bearings RE Koyo
10 Feb 2023 21:04 #247536
by gv42
Replied by gv42 on topic Re:Re:Front wheel bearings RE Koyo
The box with "2002" is the rubber seal, the one with 2008, from bigjimny
Sent from my 2201116SG using Tapatalk
Sent from my 2201116SG using Tapatalk
Please Log in or Create an account to join the conversation.
10 Feb 2023 21:06 #247537
by gv42
Replied by gv42 on topic Re:Re:Front wheel bearings RE Koyo
The rubber sealed one has branded bag
Sent from my 2201116SG using Tapatalk
Sent from my 2201116SG using Tapatalk
Please Log in or Create an account to join the conversation.
10 Feb 2023 21:08 #247538
by gv42
Replied by gv42 on topic Re:Re:Front wheel bearings RE Koyo
Information in different places
Sent from my 2201116SG using Tapatalk
Sent from my 2201116SG using Tapatalk
Please Log in or Create an account to join the conversation.
10 Feb 2023 21:24 - 10 Feb 2023 21:30 #247539
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Re:Re:Front wheel bearings RE Koyo
The differences are interesting. Here is one I bought from Koyo around a month ago.
It has a holographic label which has the Koyo logo in it which changes to jtekt when you move the light, A Koyo seal on the box lid and the writing is around the outside of the bearing .
All of the bearings I have (front, rear, kingpin and diff) have the holographic label and plain shrink wrap polythene
It might be that the one you have is old stock from somewhere but I think there is a possibility that it is fake.
Sent from my moto g42 using Tapatalk
It has a holographic label which has the Koyo logo in it which changes to jtekt when you move the light, A Koyo seal on the box lid and the writing is around the outside of the bearing .
All of the bearings I have (front, rear, kingpin and diff) have the holographic label and plain shrink wrap polythene
It might be that the one you have is old stock from somewhere but I think there is a possibility that it is fake.
Sent from my moto g42 using Tapatalk
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Last edit: 10 Feb 2023 21:30 by mlines.
Please Log in or Create an account to join the conversation.
Time to create page: 0.151 seconds