A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Rear rod
- Gromit
- Topic Author
- Visitor
-
Public
- Paul4x4
- Visitor
-
Public
- Gromit
- Topic Author
- Visitor
-
Public
11 Mar 2012 17:38 - 11 Mar 2012 17:39 #35297
by dirtydogz
2002 JLX Soft Top
Jimnybits 2" lift +Pro Comp ES1000 shocks.
Big Jimny rear shock mounts. Big Jimny adjustable panhard rods.
Big Jimny steering damper bracket. Disco Armstrong steering damper. 7X15 black modulars. 205/75/15 Maxxis 743 bravo m/t.Superpro camber correction bushes.Black A bar....
Replied by dirtydogz on topic Re: Rear rod
Weld a length of 1" angle along the panhard rods that will make it stronger.
Attachment DSCF1518.JPG not found
Attachment DSCF1515_2012-03-11.JPG not found
2002 JLX Soft Top
Jimnybits 2" lift +Pro Comp ES1000 shocks.
Big Jimny rear shock mounts. Big Jimny adjustable panhard rods.Big Jimny steering damper bracket. Disco Armstrong steering damper. 7X15 black modulars. 205/75/15 Maxxis 743 bravo m/t.Superpro camber correction bushes.Black A bar....
Attachments:
Last edit: 11 Mar 2012 17:39 by dirtydogz.
Please Log in or Create an account to join the conversation.
- TomDK
- Visitor
-
Public
11 Mar 2012 21:19 #35320
by facade
Only if they have the same mass, then the solid bar would have a much smaller diameter.
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Replied by facade on topic Re: Rear rod
TomDK wrote: Tubing is stil stronger than solid.
Only if they have the same mass, then the solid bar would have a much smaller diameter.
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Please Log in or Create an account to join the conversation.
Time to create page: 0.149 seconds