A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Well had chance to look at it today when i woke up so i fitted rear prop on with its new uj so tranny box is fully mounted now and works bob on.
Diff wise i drained oil and found a few small bits but nothing serious so then stuck a magnetic pen in drain hole a dozen times and found this and luckily thats all.
Attachment uploadfromtaptalk1332273614811.jpg not found
So jobs left to do
1. fill diff up with oil
2. Clean rear brake adjusters
3. Mount and wire up winch
4. MOT
So 3 non messy jobs but all reasonably simple once iv ordered oil for diff. Just not sure if wires on winch are long enough so need some longer ones with anderson connector to dissconnect when not in use.
Another thing i would be tempted to do woudd be to get a high pressure spray and spray paraffin in through filler hole and catch anything that came out. The oil may act a bit like glue and hold any other loose debris in there.
