arms with a pivot link

Keefe wrote:

g187eev wrote: and the front arms look like they have exactly the same mistake as we made with our first gen of arms...

RB

What was that?

What was that, then? Too Sharp a bend in the arm?

Keefe wrote: What was that, then? Too Sharp a bend in the arm?

Or maybe the bend should be between the bushings?

I'm not about to give away all the secrets of our many years hard work, R&D and experience... but all I can say is that I would predict these arms may have some issues...

We have spent thousands in the development on our radius arms and Jimny lift kit components, and we are now so confident that you will not buy/find a beefier radius arm, and that YOU CANNOT break them, that ours come with out "no questions asked, lifetime warranty"... claims to date since the launch of our current radius arms approximately 18 months ago... = "0"

RB

I must say the newer arms are a considerable improvement on the first set I had.

looking at those pivot arms, and their construction all I can say is i hope anyone with them fitted doesn't hope to drive anywhere, let alone off road with them.

Sent from my Galaxy Nexus using Tapatalk