A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
Lower gear shifter bush
- Danparry
- Topic Author
- Visitor
-
Public
17 Oct 2023 09:37 #251512
by Danparry
Lower gear shifter bush was created by Danparry
Hey
I noticed on my garage floor the white nylon lower gear shifter bush that goes on the bottom of the shifter under the car,
I put it back on but seems to kinda come loose easily,
I looked up a replacement part but it's black?? Not white nylon?
Is it the same or am i missing a piece somewhere?
The white one in the picture is of the same one I have
The black one in pic is a replacement but different?
I noticed on my garage floor the white nylon lower gear shifter bush that goes on the bottom of the shifter under the car,
I put it back on but seems to kinda come loose easily,
I looked up a replacement part but it's black?? Not white nylon?
Is it the same or am i missing a piece somewhere?
The white one in the picture is of the same one I have
The black one in pic is a replacement but different?
Please Log in or Create an account to join the conversation.
- Danparry
- Topic Author
- Visitor
-
Public
- Danparry
- Topic Author
- Visitor
-
Public
20 Oct 2023 06:50 #251594
by yakuza
Norway 2005 Jimny M16A VVT, 235 BFG MT, 2" Trailmaster, ARB rear lck, 17%/87% high/low gears.
Replied by yakuza on topic Lower gear shifter bush
While you are under there, the shaft seals for the manouver shafts also are accessible for a change possibly. They are cheap from Suzuki.
I got those but will do the bushings too when I change them. I suspect that worn out bushing may cause the gear leaver to be a bit floppy too. jumps out of first gear if i touch the gear leaver when I take off
I got those but will do the bushings too when I change them. I suspect that worn out bushing may cause the gear leaver to be a bit floppy too. jumps out of first gear if i touch the gear leaver when I take off
Norway 2005 Jimny M16A VVT, 235 BFG MT, 2" Trailmaster, ARB rear lck, 17%/87% high/low gears.
Please Log in or Create an account to join the conversation.
Time to create page: 0.228 seconds