A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
Helicoil or Tap
22 Apr 2023 10:28 #248754
by tomcat
Helicoil or Tap was created by tomcat
In removing the bull guard & front bumper it was necessary to drill out 2 of the captive nut fittings. Picture attached.
I thought I had used a 5mm drill but in fact had used a 6mm.
2 options are possible a) a 6mm Helicoil or b) tap out for a 8mm fitment.
As it is a captive nut not sure a Helicoil would work?
Opinions please. ThanksĀ
I thought I had used a 5mm drill but in fact had used a 6mm.
2 options are possible a) a 6mm Helicoil or b) tap out for a 8mm fitment.
As it is a captive nut not sure a Helicoil would work?
Opinions please. ThanksĀ
Please Log in or Create an account to join the conversation.
- jackonlyjack
-
- Offline
- Platinum Member
-
Registered
23 Apr 2023 17:55 #248803
by facade
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Replied by facade on topic Helicoil or Tap
M7x1.0 is a fairly common tap, the bolts usually have an 11mm hex head.
However, if you've had an M6 helicoil come out there isn't enough metal for an M7 thread.
(Don't you have to drill 1/4" for an M6 helicoil? The tapping drill for M7x1.0 is 6.0mm)
I wouldn't be happy tapping M8x1.25 after helicoil tapping at 1.0 tbh, I'd go fine pitch M8x1.0 and pick up on the threads for the helcoil
However, if you've had an M6 helicoil come out there isn't enough metal for an M7 thread.
(Don't you have to drill 1/4" for an M6 helicoil? The tapping drill for M7x1.0 is 6.0mm)
I wouldn't be happy tapping M8x1.25 after helicoil tapping at 1.0 tbh, I'd go fine pitch M8x1.0 and pick up on the threads for the helcoil
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Please Log in or Create an account to join the conversation.
Time to create page: 0.172 seconds