A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
New Member and Advice Needed...
- biggaz
- Visitor
-
Public
05 Feb 2011 21:00 #11057
by biggaz
Replied by biggaz on topic Re: New Member and Advice Needed...
www.4x4at.com/
These do modulars, although they were out of stock when i wanted some, worth trying them as they do tyres aswell but are more expensive than camskill.
plan sounds good to me, should work well
These do modulars, although they were out of stock when i wanted some, worth trying them as they do tyres aswell but are more expensive than camskill.
plan sounds good to me, should work well
Please Log in or Create an account to join the conversation.
- hulatt
- Visitor
-
Public
04 Aug 2011 11:57 #19947
by hulatt
Replied by hulatt on topic Re: New Member and Advice Needed...
Hi
Sorry to hijack this thread, have been doing some research on upgrading our little Jimny. Was intending doing something similar i.e. a 2" sus lift and some slightly bigger MT's. As it is stock at the minute I like the idea of 215/75's as said previously they should not rub. I also like the idea of getting modulars with a smaller offset, what offset can I get away with without rubbing etc with the car in standard form?
Sorry to hijack this thread, have been doing some research on upgrading our little Jimny. Was intending doing something similar i.e. a 2" sus lift and some slightly bigger MT's. As it is stock at the minute I like the idea of 215/75's as said previously they should not rub. I also like the idea of getting modulars with a smaller offset, what offset can I get away with without rubbing etc with the car in standard form?
Please Log in or Create an account to join the conversation.
Time to create page: 0.118 seconds