×
Grey Pictures! (19 Mar 2017)

Pictures from IPHONES in PORTRAIT mode are coming out grey. Either take the picture in landscape mode or upload to a sharing site such as Photobucket or use a picture editor to remove the EXIF data.

× Tell us about your Jimny and post some pictures! Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Aussie 2006 Jimny - 4" lift, 30" BFGs, M18a VVT

More
05 Feb 2011 20:08 #11053 by zukenutter
zukenutter replied the topic: Re: Aussie 2000 Jimny
CNC'd some caster plates recently. Was a worthwhile experiment but one that will end up in the bin. Too many issues particularly clearance issues.

Here's some pics



SUZUKI - Way of life!

Please Log in or Create an account to join the conversation.

More
05 Feb 2011 22:11 #11069 by vitara_mad
vitara_mad replied the topic: Re: Aussie 2000 Jimny
looks a good idea from the pics & looks to do the job to me

what is the problem with them ???

Please Log in or Create an account to join the conversation.

More
06 Feb 2011 00:43 #11071 by zukenutter
zukenutter replied the topic: Re: Aussie 2000 Jimny
Tie rod was touching the arm, and the front drive shaft was only a couple of mm off the chassis cross member. Short story, too much caster adjustment on only one eye. I've decided on custom arms. I could put a caster bush in the rear eye but wanted lose the caster bushes. The plates were definitely solid enough but cause too many other headaches to warrant continuing.

SUZUKI - Way of life!

Please Log in or Create an account to join the conversation.

More
09 Feb 2011 11:26 #11231 by Monkey
Monkey replied the topic: Re: Aussie 2000 Jimny
Nice jimny!

2009 VVT jimny

Tough Dog 120mm lift
Custom front shocks & procomp rear shocks
Extractor's with 2" exhaust
Adjustable Pandhard's
Tough Dog RTC
31x10.5 procomps on 15x8 -22 rims
K&N filter
GME 3100TX UHF
xrox bar
TJM air tech snorkel
shock relocation brackets
Tigzer11 winch
custom sliders
Braced...

Please Log in or Create an account to join the conversation.

More
09 Feb 2011 20:29 #11274 by zukenutter
zukenutter replied the topic: Re: Aussie 2000 Jimny

Monkey wrote: Nice jimny!


Haha, tracked down by the "Funky Gibbon". How you going Monkey, this is a great forum for Jimny info. It's where I go looking for info when I can't find it elsewhere, the UK guys know Jimnys.

SUZUKI - Way of life!
The following user(s) said Thank You: davert85

Please Log in or Create an account to join the conversation.

More
09 Feb 2011 20:37 #11277 by Monkey
Monkey replied the topic: Re: Aussie 2000 Jimny

zukenutter wrote:

Monkey wrote: Nice jimny!


Haha, tracked down by the "Funky Gibbon". How you going Monkey, this is a great forum for Jimny info. It's where I go looking for info when I can't find it elsewhere, the UK guys know Jimnys.


Yep found you. With the castor adjustment the can do it digitally and get it perfect i will be getting the TSOR arms which are suited to 70 to 100mm lifts and then with offset bushs the castor will be perfect for our height.

2009 VVT jimny

Tough Dog 120mm lift
Custom front shocks & procomp rear shocks
Extractor's with 2" exhaust
Adjustable Pandhard's
Tough Dog RTC
31x10.5 procomps on 15x8 -22 rims
K&N filter
GME 3100TX UHF
xrox bar
TJM air tech snorkel
shock relocation brackets
Tigzer11 winch
custom sliders
Braced...

Please Log in or Create an account to join the conversation.

More
09 Feb 2011 21:05 #11281 by zukenutter
zukenutter replied the topic: Re: Aussie 2000 Jimny

Monkey wrote:

zukenutter wrote:

Monkey wrote: Nice jimny!


Haha, tracked down by the "Funky Gibbon". How you going Monkey, this is a great forum for Jimny info. It's where I go looking for info when I can't find it elsewhere, the UK guys know Jimnys.


Yep found you. With the castor adjustment the can do it digitally and get it perfect i will be getting the TSOR arms which are suited to 70 to 100mm lifts and then with offset bushs the castor will be perfect for our height.


Yeah I've already spoken to Pete about a set of his arms and if I feel the need after fitting them I may just put a single caster bush on each side.

SUZUKI - Way of life!

Please Log in or Create an account to join the conversation.

More
10 Feb 2011 07:27 #11295 by Monkey
Monkey replied the topic: Re: Aussie 2000 Jimny

zukenutter wrote:

Monkey wrote:

zukenutter wrote:

Monkey wrote: Nice jimny!


Haha, tracked down by the "Funky Gibbon". How you going Monkey, this is a great forum for Jimny info. It's where I go looking for info when I can't find it elsewhere, the UK guys know Jimnys.


Yep found you. With the castor adjustment the can do it digitally and get it perfect i will be getting the TSOR arms which are suited to 70 to 100mm lifts and then with offset bushs the castor will be perfect for our height.


Yeah I've already spoken to Pete about a set of his arms and if I feel the need after fitting them I may just put a single caster bush on each side.


Do you have off-set bushs ATM?

2009 VVT jimny

Tough Dog 120mm lift
Custom front shocks & procomp rear shocks
Extractor's with 2" exhaust
Adjustable Pandhard's
Tough Dog RTC
31x10.5 procomps on 15x8 -22 rims
K&N filter
GME 3100TX UHF
xrox bar
TJM air tech snorkel
shock relocation brackets
Tigzer11 winch
custom sliders
Braced...

Please Log in or Create an account to join the conversation.

More
10 Feb 2011 07:42 #11298 by zukenutter
zukenutter replied the topic: Re: Aussie 2000 Jimny

Monkey wrote:

zukenutter wrote:

Monkey wrote:

zukenutter wrote:

Monkey wrote: Nice jimny!


Haha, tracked down by the "Funky Gibbon". How you going Monkey, this is a great forum for Jimny info. It's where I go looking for info when I can't find it elsewhere, the UK guys know Jimnys.


Yep found you. With the castor adjustment the can do it digitally and get it perfect i will be getting the TSOR arms which are suited to 70 to 100mm lifts and then with offset bushs the castor will be perfect for our height.


Yeah I've already spoken to Pete about a set of his arms and if I feel the need after fitting them I may just put a single caster bush on each side.


Do you have off-set bushs ATM?


Yeah I've had the same set for 10 years

SUZUKI - Way of life!

Please Log in or Create an account to join the conversation.

More
10 Feb 2011 07:46 #11299 by Monkey
Monkey replied the topic: Re: Aussie 2000 Jimny

zukenutter wrote:

Monkey wrote:

zukenutter wrote:

Monkey wrote:

zukenutter wrote:

Monkey wrote: Nice jimny!


Haha, tracked down by the "Funky Gibbon". How you going Monkey, this is a great forum for Jimny info. It's where I go looking for info when I can't find it elsewhere, the UK guys know Jimnys.


Yep found you. With the castor adjustment the can do it digitally and get it perfect i will be getting the TSOR arms which are suited to 70 to 100mm lifts and then with offset bushs the castor will be perfect for our height.


Yeah I've already spoken to Pete about a set of his arms and if I feel the need after fitting them I may just put a single caster bush on each side.


Do you have off-set bushs ATM?


Yeah I've had the same set for 10 years


10 years must be getting close to there used by date aye?

2009 VVT jimny

Tough Dog 120mm lift
Custom front shocks & procomp rear shocks
Extractor's with 2" exhaust
Adjustable Pandhard's
Tough Dog RTC
31x10.5 procomps on 15x8 -22 rims
K&N filter
GME 3100TX UHF
xrox bar
TJM air tech snorkel
shock relocation brackets
Tigzer11 winch
custom sliders
Braced...

Please Log in or Create an account to join the conversation.

More
10 Feb 2011 07:50 #11300 by zukenutter
zukenutter replied the topic: Re: Aussie 2000 Jimny
I've got a set of rubber ones ready to go into the new front arms

SUZUKI - Way of life!

Please Log in or Create an account to join the conversation.

More
10 Feb 2011 08:00 #11301 by Monkey
Monkey replied the topic: Re: Aussie 2000 Jimny
Ok

I hope pete's arms won't be to costly.

2009 VVT jimny

Tough Dog 120mm lift
Custom front shocks & procomp rear shocks
Extractor's with 2" exhaust
Adjustable Pandhard's
Tough Dog RTC
31x10.5 procomps on 15x8 -22 rims
K&N filter
GME 3100TX UHF
xrox bar
TJM air tech snorkel
shock relocation brackets
Tigzer11 winch
custom sliders
Braced...

Please Log in or Create an account to join the conversation.

Moderators: funkyjimnyooky_123
Time to create page: 0.074 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.