×
Search (23 Feb 2018)

A trial enhanced search facility has been enabled. Please use the Google Custom Search above.

× A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Alternator belt tightening

More
12 Dec 2017 22:20 #187395 by chris1211
chris1211 created the topic: Alternator belt tightening
Is this the bolt you unscrew a little bit to adjust the belt tension, the picture is taken upside down any help :)
Attachments:

Please Log in or Create an account to join the conversation.

More
13 Dec 2017 05:34 #187401 by Lambert
Lambert replied the topic: Alternator belt tightening
One of them yes. You will need to slack off the other mounting bolt too to allow it to rotate.

It's not a Jimny. It's my Jimny

Mooo said Ermintrude (black)
Boing said Zebedee (blue)

Please Log in or Create an account to join the conversation.

More
13 Dec 2017 06:22 #187404 by chris1211
chris1211 replied the topic: Alternator belt tightening
Wheres the other one to

Please Log in or Create an account to join the conversation.

More
13 Dec 2017 07:24 #187405 by Lambert
Lambert replied the topic: Alternator belt tightening
If you look closely you can see on the opposite side of the alt that there's a solid mounting point to the block, a pivot about which the adjustment you pictured rotates. Just needs to be a bit slack so the whole alt can move.

It's not a Jimny. It's my Jimny

Mooo said Ermintrude (black)
Boing said Zebedee (blue)

Please Log in or Create an account to join the conversation.

More
13 Dec 2017 17:14 #187412 by chris1211
chris1211 replied the topic: Alternator belt tightening
Okay cheers will look tomorrow

Please Log in or Create an account to join the conversation.

Moderators: funkyjimnyooky_123
Time to create page: 0.082 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.