Body Lift

Hello from Manila, Philippines.

Happy to let you guys know I am done with my 2in bodylift, putting all the guides I gathered from here.
Just one remaining question which left me worried. In my auto-tranny, before the bodylift, I noticed the rubber mount (tranny support mount) sitting on the cross-member, that looks to be attached on the auto-tranny. Now, after the process, obviously they got separated, but to my surprise, it seems there was no ruptured rubber during the separation, it seems it was just there as a "seat" for the tranny.

I am leaning towards fabricating an extended mount to bring back the original settng, but wanting to hear it from you guys if this is normal and can be left as-is. From all Jimny BL guide, I havent seen any reference mentioning about the transmission support. (all was brake junction, air box tube, gas filler tube, front brake lines, bumper brackets, and the tcase level shifter bending..and again none ever mentioned for the tranny mount support.)

Cheers,
Ash

Any chance of a photo ?
as this sounds wrong because everything transmission wise should stay with chassis

jackonlyjack wrote: Any chance of a photo ?
as this sounds wrong because everything transmission wise should stay with chassis

will try to take a clear photo at daytime.