×
BigJimnyMeet (North) 2024 (12 Jan 2024)


BigJimnyMeet 2024

14th July 2024
Parkwood Nr. Leeds

Booking now open - Discount for additional vehicles

Click HERE for details

× A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Steering dampers!

More
19 May 2011 09:37 #16550 by Toad
Steering dampers! was created by Toad
Hi all, has any one actually fitted one of these steering damper kits that are advertised and did it actually stop the death wobble from 40-45 mph?

Looking at the kits they appear to fit to various points of the chassis or axle casings. I thought that unless the end is mounted to a solid point ie chassis then of little use?

Cheers Toad

Please Log in or Create an account to join the conversation.

  • Sandez
  • Visitor
  • Visitor
    Public
19 May 2011 09:53 #16552 by Sandez
Replied by Sandez on topic Re: Steering dampers!
I havent had one installed yet, but from what I have read throughout the forums it does stop the death wobble.

This is an install I found on another website. Shows how the damper is mounted

Please Log in or Create an account to join the conversation.

  • gazert
  • Visitor
  • Visitor
    Public
19 May 2011 15:48 #16564 by gazert
Replied by gazert on topic Re: Steering dampers!
I have one.
It reduces the wobble but if u have worn items you will still have it but not as bad!

Please Log in or Create an account to join the conversation.

More
19 May 2011 16:14 #16565 by mlines
Replied by mlines on topic Re: Steering dampers!
They will not stop death wobble. The frequency and strength of the Death Wobble is too much for them.

They stop the general looseness and wandering of the steering, I wouldn't be without mine. However the one in the picture above wouldn't last 5 minutes off-roading as it is too low.

Watch out on my website for a cheaper version which is just in production.

Martin

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

  • Keefe
  • Visitor
  • Visitor
    Public
19 May 2011 16:34 #16566 by Keefe
Replied by Keefe on topic Re: Steering dampers!
Mine fits like the one in the picture (not happy with it) but have been told to fit it to the rear of the axle and to the tie rod.
You'll not see it from the front (LoL!) but at least it'll be out of the way. :-)

Please Log in or Create an account to join the conversation.

Time to create page: 0.103 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.

We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.