×
BigJimnyMeet (North) 2024 (12 Jan 2024)


BigJimnyMeet 2024

14th July 2024
Parkwood Nr. Leeds

Booking now open - EARLY BIRD DISCOUNTED PRICE

Click HERE for details

× A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

fitting a winch into standard bumper

More
25 Aug 2008 22:45 #134 by kevant
While i was browsing the pictures on this website i noticed a couple of jimnys had a winch installed without having to go to the expense of putting an ARB bumper on. That would suit me fine if i could do that as i dont often go off road and i would like to keep my jimny looking as normal as poss but a winch would be very handy could anyone please explain how they have put the winch on and what have they connected it to does it go on to a tray then weld straight to the chassis or what ?

Please Log in or Create an account to join the conversation.

More
26 Aug 2008 08:26 - 26 Aug 2008 08:27 #135 by mlines
Hi,

There are a couple with built in winches in the pictures, the most recent being from Colin F (see COLIN )

Colin has said he will send in pictures of the mount as this subject is very popular!

Martin

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Last edit: 26 Aug 2008 08:27 by mlines.

Please Log in or Create an account to join the conversation.

More
26 Aug 2008 10:17 #136 by kevant
Thanks for the reply Martin that is exactly what i want to do to mine just cant work out how Colin managed to fit it all behind there i have seen those winches and to get a decent 6000lb winch jammed into there with no mess is not an easy job i cant wait to see his further posts on the subject. O and im a new user been looking round for a decent site for the Jimny this is excellent top job.

Please Log in or Create an account to join the conversation.

More
02 Sep 2008 01:00 - 02 Sep 2008 01:03 #146 by llrb
Hi there,
I'm not sure if these pics attached but they are
of the stages when fitting my 10,000lb winch last week.
Hope they help
Clint
Attachments:
Last edit: 02 Sep 2008 01:03 by llrb. Reason: pics didn't attach

Please Log in or Create an account to join the conversation.

More
02 Sep 2008 09:25 #147 by kevant
No Pictures to be found clint maybe you should try and post them again and if you want you can email me them at This email address is being protected from spambots. You need JavaScript enabled to view it. as i have just bought my winch and could do with all the help i could get. Kevan

Please Log in or Create an account to join the conversation.

More
02 Sep 2008 10:04 #148 by mlines
Or send the pictures to me and I will put them in the forum.

This email address is being protected from spambots. You need JavaScript enabled to view it.


Martin

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

More
04 Sep 2008 19:16 #159 by kevant
Thank you very much for the pictures Clint they are excellent and have given me a real heads up on fitting my winch i did not realise how big and heavy these beasts are until my arrived in the post the other day so now at least i know what i am up against.

Many Thanks kevant

Please Log in or Create an account to join the conversation.

More
07 Sep 2008 09:17 #164 by Gaz
any chance you could send me the pics too my good man , having trimmed the bumper i now would like to squeeze a winch in there .

many thanks
Gaz

Please Log in or Create an account to join the conversation.

More
07 Sep 2008 10:23 #165 by kevant
I have sent them to Martin hopefully he can put them on this site for all of us to see. if you cant wait just give me your email.

Please Log in or Create an account to join the conversation.

More
07 Sep 2008 12:16 #166 by Gaz
This email address is being protected from spambots. You need JavaScript enabled to view it.

cheers

Please Log in or Create an account to join the conversation.

More
07 Sep 2008 20:21 #167 by mlines
Thanks to Kevant I have published the pictures HERE - hope Clint doesn't mind - great pictures that lots of people have been waiting for.

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

Time to create page: 0.150 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.

We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.