JK's Jimny - Tasmania - Australia M18A, Manual with Auto Transfer and 30" KM2's

Update Time,


Finally Did my Clutch, got a HD one from Ebay.

Install took longer than originally planned as the bolts had alloy bind

took me a few days to get used to driving again.

Also go to take my boat out last weekend and got a feed of flathead

Found a home for my 20" light bar, completely over kill but makes night driving on backroads awesome Armsup

Now for the negatives

My Exhaust Manifold is about stuffed, covered in cracks everywhere we tried welding as a patch job with not a lot of luck. so next will be looking at options of either A. Extractors and Exhaust or B. just another stock Manifold.

Few pics from my Mag Article

Update Time.

have forgotten for a while.

Got a 2" Exhaust System from the Cat back with a set of Redback extractors




Also been busy building myself a Mancave





Got bored last weekend decided to fit up the M18A Inlet Manifold ( had avoided it first time because needed extra inlet for vacuum hubs ) - 2nd pic is the T Joiner I used to solve that issue.






Here's a progress shot of how far the Jimny has come.




Here's one next to a stocker.

Forgot to Mention we have had a fair bit of snow here in Tassie.












Last Pic is of all the cars stuck haha

is that a quintrex estuary angler 445 ? i have the same boat but in white =)

GraphicX wrote: is that a quintrex estuary angler 445 ? i have the same boat but in white =)

Nah Savage Bay Cruiser 415

Looking really really good mate, great pics too as always

Been a while since I have looked at updating forums more lack of time than anything.

So here is a dump of about the last 12 months.

Did a trip mid last year with some guys.
Has to be the hardest wheeling I have ever done and the Zook loved it. lots of technical rock steps.


Heres a screenshot of the zook hitting a hole at full noise


A pic of the convoy we had


Because Zook


Old Mine Site



Fallen Tree we had to clear





Scratches :rambo:

Forgot to add

I got to recover an 80 Series Cruiser

End of Last year one of the Local 4WD shops had an open day.

They had a 4wd track built out the back for drivers to take a crack at.

Let just say there was patrols ETC that got pulled out by the tractor.























Couple in Dash Cam Videos

Run 1


Run 2