4x4 dash switch and transfer box connector

hey guys anyone know where i can get the replacement dash 4x4 switches mines knackered, and a new transfer box connector?
i,m not having much luck finding, or the small micro switches to solder in myself. any help be great cheers L

If no one on here has any parts, if you have not done so already, try eBay for "breaking Jimny 2005 ( Change year if needed ). This tends to find someone breaking said vehicle, you then need to phone or email them. Cam Suzuki are one to try as they do this.

www.camsuzuki.com/

Not linked to them in any way or saying they are good / bad as never used their services, but it's a starter answer.

Or if you want new parts ask Martin (Big Jimny) if he can get them.

Good luck finding the parts.

Mike

J999pre (James Priestly) will probably have the bits you are after, worth sending a message or looking him up on facebook

hey up scimike, yeah did exactly that, and rang cam suzuki who fitted my gear box, guy said i had that prob, cant remember how i fixed it sorry for being no help whatsoever! many thanks i said. , so still searching mate

cheers riccy, i,ll try find him mate , ta,, thing is i dont have facebook for reasons of personal security from mad women!!

TA RICCY, I GOT IN TOUCH WITH JAMES , MANY THANKS

i fitted new cabin buttons and now pressing 4wd it seems to go into 4wd but the green light flashes and will not go back into 2wd by pressing the 2wd button.
after a few days it goes static green and then pressing the 2wd yippie its disengaged. do i need to replace the switches godfather68 talks of iin his similar v interseting thread? or is it a solenoid thats stuck and needs hammmering??
i need 4wd at work most days , any ideas guys would be much app. cheers Liam.

Your comment on my thread that you have manual locking hubs seems relevant? I am no expert but from what people have been pointing me at, I would have thought when yours was changed to manual hubs, your vacuum system should have been tricked by the grey switch being shorted out as the flashing green light (as I understand it) means the 4wd controller does not think a vacuum has been created to engage the hubs, but in your case the vac is not locking the hubs, you are manually?