×
BigJimny Meet 2019 (17 May 2019)

BigJimny Meet and off-road driving day



20TH OCTOBER 2019

NOW BOOKING - CLICK HERE


See HERE for details - See HERE for discussion

× A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Steering Box seals and rebuilding

More
17 May 2019 15:22 #208210 by Jim Jim
Hi Guys,
I searched here for info but did not find anything.
Has anyone replaced their Jimny 3 steering box seals? Mine is leaking and I would like to know if anyone did and your thoughts. I should look for workshop manuals for this Jimny too.

I have seen a few seal kits like this one www.superspares.com.au/power-steering-bo...r-suzuki-jimny-10-19
Please advise.
Thanks.

Please Log in or Create an account to join the conversation.

  • Lambert
  • Lambert's Avatar
  • Offline
  • Moderator
  • Moderator
    Registered
  • The quickest Jimny in Harrogate...(that I own)
More
17 May 2019 15:30 #208211 by Lambert
Never done a Suzuki one. But I have been inside a land rover one. Bit of a pig of a job. If i had to do it again I would send it to a specialist.

Dreadnaught (black 2011)

Please Log in or Create an account to join the conversation.

More
17 May 2019 16:56 #208220 by Jim Jim
I am rebuilding/modifying my 1997 LR Defender 110 hard top and had the steering box rebuilt too, it is a bit of a pain indeed, heavy too.

From what I read, the Jimny's steering box had a lot of ball bearings, not sure how deep you have to go to change the seals.

Please Log in or Create an account to join the conversation.

Moderators: funkyjimnyooky_123
Time to create page: 0.061 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.