-
Forum
-
Suzuki Jimny
-
Jimny Technical
-
Body mounts nut help
×
BigJimnyMeet 2024
14th July 2024
Parkwood Nr. Leeds
Booking now open - Discount for additional vehicles
Body mounts nut help
-
Daniel30
-
Topic Author
-
Visitor
-
Public
11 May 2019 11:52 #207723
by Daniel30
Hi all
Trying to undo my body mounts and was wondering if anyone knows the right socket for them? I know they have to be quite long as the bolt is quite long any help would be appreciated thanks
Please Log in or Create an account to join the conversation.
Less
More
-
Posts: 2909
-
Thank you received: 651
-
Points: 8451.00
-
-
-
-
11 May 2019 18:48 #207734
by jackonlyjack
17 and 19 i think i used an off set ring spanner
also a 500mm scaffold tube extension
plenty of wwd40 good luck
Please Log in or Create an account to join the conversation.
-
Daniel30
-
Topic Author
-
Visitor
-
Public
11 May 2019 22:33 #207738
by Daniel30
Thanks Jack
Finally got them off 14mm at the front and 17mm back and boy they were tight!
Please Log in or Create an account to join the conversation.
-
Lambert
-
-
Offline
-
Moderator
-
Registered
-
The quickest Jimny in Harrogate...(that I own)
Less
More
-
Posts: 8811
-
Thank you received: 1759
-
Points: 36248.00
-
-
-
-
-
12 May 2019 05:28 #207746
by Lambert
Deep socket set and a rattle gun?
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Please Log in or Create an account to join the conversation.
-
Forum
-
Suzuki Jimny
-
Jimny Technical
-
Body mounts nut help
Time to create page: 0.091 seconds