×
BigJimny Meet 2019 (17 May 2019)

BigJimny Meet and off-road driving day



20TH OCTOBER 2019

NOW BOOKING - CLICK HERE


See HERE for details - See HERE for discussion

× A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Steering geometries specifically scrub radius.

  • Lambert
  • Lambert's Avatar Topic Author
  • Offline
  • Moderator
  • Moderator
    Registered
  • The quickest Jimny in Harrogate...(that I own)
  • Posts: 3926
  • Thank you received: 650
  • Points: 6038.00
  • Gen 3 Jimny GV (2010) Gen 3 Jimny
06 May 2019 09:06 #207435 by Lambert
As part of project v8 widow maker I am looking at needing to improve the available grip. This is easiest done with wider tyres. Problem is while I can calculate relative alteration in things like scrub radius and castor angles I have yet to find the actual factory figures to kno where I am staring from. Does anyone have any links or information on the finer details of the gen3 steering? Ideally steering angle inclination, scrub radius, castor angles, camber angle etc. It's easier to use mathematics to work it out than it is to fire the parts cannon at it and see what sticks.

Cheers.

Dreadnaught (black 2011)

Please Log in or Create an account to join the conversation.

  • Posts: 2457
  • Thank you received: 439
  • Points: 379.00
  • Gen 3 Jimny Gen 3 Jimny Gen 3 Jimny
06 May 2019 16:29 #207462 by S200KYS
The following user(s) said Thank You: Lambert

Please Log in or Create an account to join the conversation.

  • Lambert
  • Lambert's Avatar Topic Author
  • Offline
  • Moderator
  • Moderator
    Registered
  • The quickest Jimny in Harrogate...(that I own)
  • Posts: 3926
  • Thank you received: 650
  • Points: 6038.00
  • Gen 3 Jimny GV (2010) Gen 3 Jimny
06 May 2019 20:07 #207463 by Lambert
Cheers Dave. I think I have seen that already. Or something like it. Thanks.

Dreadnaught (black 2011)

Please Log in or Create an account to join the conversation.

Moderators: funkyjimnyooky_123
Time to create page: 0.047 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.