BigJimnyMeet (North) 2024 (12 Jan 2024)

BigJimnyMeet 2024

14th July 2024
Parkwood Nr. Leeds

Booking now open - Discount for additional vehicles

Click HERE for details

× A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Track rod end nut size

Start
Prev
1
Next
End

JimnyBrian
Topic Author
Visitor
Public

14 Feb 2019 18:42 #203226 by JimnyBrian

Track rod end nut size was created by JimnyBrian

Probably been asked before but can’t find in search. Just changed springs on front but need new track rod end nuts. They are nylock type not castle nuts what size thread are they. Thanks

Please Log in or Create an account to join the conversation.

Lambert
Offline
Moderator
Registered
The quickest Jimny in Harrogate...(that I own)

14 Feb 2019 19:57 #203233 by Lambert

Replied by Lambert on topic Track rod end nut size

Welcome to the forum. They are m12 but I can't remember if the factory ones are 1.5 or 1.25 my aftermarket ones are m12x1.5 with a 19mm nut. As to the part that threads into the rods I'm sorry I just can't remember! I want to say some variety of m16 but I'm not sure.

Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!

The following user(s) said Thank You: JimnyBrian

Please Log in or Create an account to join the conversation.

Max Headroom
Offline
Banned
Registered
OPEN AIR MOTORING... 93 MILLION MILES OF HEADROOM

14 Feb 2019 20:21 #203236 by Max Headroom

Replied by Max Headroom on topic Track rod end nut size

A BigJimny Welcome to the forums Brian

Sorry I can't help on this but someone will !

IF IT AINT BROKE, KEEP FIXING IT UNTIL IT IS

The following user(s) said Thank You: JimnyBrian

Please Log in or Create an account to join the conversation.

1390_taz
Offline
Elite Member
Registered

14 Feb 2019 21:10 #203238 by 1390_taz

Replied by 1390_taz on topic Track rod end nut size

Welcome to the forum from East Anglia.
Track rod ends are cheap enough i would change the whole thing

The following user(s) said Thank You: JimnyBrian

Please Log in or Create an account to join the conversation.

kirkynut
Offline
Moderator
Registered

14 Feb 2019 22:50 #203242 by kirkynut

Replied by kirkynut on topic Track rod end nut size

Have a look in the Big Jimny shop.

Kirkynut

The underdog often starts the fight, and occasionally the upper dog deserves to win - Edgar Watson Howe.

My Jimny Thread Here: www.bigjimny.com/index.php/forum/8-my-ji...on-continues?start=0

The following user(s) said Thank You: JimnyBrian

Please Log in or Create an account to join the conversation.