×
BigJimny Meet 2019 (17 May 2019)

BigJimny Meet and off-road driving day



20TH OCTOBER 2019

BOOK NOW (BOOKING CLOSES EARLY OCTOBER!!) - CLICK HERE


See HERE for details - See HERE for discussion


Noggin and Natter - pre-event chat - Old Bell at Grazeley (part of hotel) 7:30pm 19th October

× A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

What thread is this?

More
25 Nov 2018 13:30 #198129 by paradox1001
I’ve a pair of monroe dampers to fit to the front of my jimny
Upon opening the box I found they only came with one nut and it’s not a nylock.

I need to buy some nuts but it doesn’t appear to be metric





Hopefully the pictures show as I can’t see a lot of the pictures on the forum.

Please Log in or Create an account to join the conversation.

  • Lambert
  • Lambert's Avatar
  • Away
  • Moderator
  • Moderator
    Registered
  • The quickest Jimny in Harrogate...(that I own)
More
25 Nov 2018 13:59 #198133 by Lambert
Replied by Lambert on topic What thread is this?
What's it out of! Looks vaguely imperial if it's fitting a 24tpi guage? 3/8 unf maybe. 14mm is 11/16?

Dreadnaught (black 2011)
The following user(s) said Thank You: paradox1001

Please Log in or Create an account to join the conversation.

More
25 Nov 2018 14:06 #198134 by paradox1001
Replied by paradox1001 on topic What thread is this?
It’s the thread on the top of some monroe front dampers for my jimny

Please Log in or Create an account to join the conversation.

More
25 Nov 2018 14:32 - 25 Nov 2018 14:33 #198138 by paradox1001
Replied by paradox1001 on topic What thread is this?
Cheers lambert
They reckon 3/8ths unf on another forum so I’ve ordered some nylocks.

I will have to wait a bit longer to fit them now.

Being of a younger generation I’m useless when it comes to imperial stuff.
Last edit: 25 Nov 2018 14:33 by paradox1001.

Please Log in or Create an account to join the conversation.

More
26 Nov 2018 06:23 - 26 Nov 2018 06:29 #198168 by S200KYS
Replied by S200KYS on topic What thread is this?
Yes, 3/8" UNF 24 (same as ProComp)

I have some nylocs here if you haven't ordered them yet?

Dave

Wandered off for a bit... ;)
Last edit: 26 Nov 2018 06:29 by S200KYS.
The following user(s) said Thank You: paradox1001

Please Log in or Create an account to join the conversation.

More
26 Nov 2018 08:40 #198170 by paradox1001
Replied by paradox1001 on topic What thread is this?
Thanks for the offer Dave but I’ve all ready ordered some.

Please Log in or Create an account to join the conversation.

Moderators: funkyjimnyooky_123
Time to create page: 0.094 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.