×
BigJimnyMeet (North) 2024 (12 Jan 2024)
BigJimnyMeet 2024
14th July 2024
Parkwood Nr. Leeds
14th July 2024
Parkwood Nr. Leeds
Booking now open - Discount for additional vehicles
Click HERE for details
Click HERE for details
×
A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Jimny M13A Magnecor leads
- jim
- Topic Author
- Visitor
-
Public
05 Nov 2018 17:40 - 05 Nov 2018 17:46 #197339
by jim
Jimny M13A Magnecor leads was created by jim
After another cheap set of HT leads perishing on my Jimny, I spoke to Magnecor to ask why they don't list a set of leads for the M13a VVT, as they've been around since 2005 now. These leads don't actually cost much more, have a 10 year warranty and according to them they've never had a faulty set back.
He did say they have been asked to do a 2 lead set for the 1.3 DOHC M13A VVT Suzuki swift and they may fit (see below)
MAGNECOR
Does anyone know if they will fit?
I'm going to measure my leads, Magnecor told me these swift ones are 3.75" and 11" in length.
He did say they have been asked to do a 2 lead set for the 1.3 DOHC M13A VVT Suzuki swift and they may fit (see below)
MAGNECOR
Does anyone know if they will fit?
I'm going to measure my leads, Magnecor told me these swift ones are 3.75" and 11" in length.
Last edit: 05 Nov 2018 17:46 by jim.
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 1039
- Thank you received: 305
- Points: 5197.00
-
06 Nov 2018 08:26 #197381
by sniper
Replied by sniper on topic Jimny M13A Magnecor leads
M16A swift will fit, I've looked at the KV85 set for future use, 45580 part number is listed for both the swift M13A and M16A. Magnecor is good stuff...
sniper
sniper
The following user(s) said Thank You: jim, Max Headroom
Please Log in or Create an account to join the conversation.
- Max Headroom
-
- Offline
- Banned
-
Registered
- OPEN AIR MOTORING... 93 MILLION MILES OF HEADROOM
Less
More
- Posts: 1091
- Thank you received: 217
- Points: 4154.00
06 Nov 2018 09:44 #197384
by Max Headroom
IF IT AINT BROKE, KEEP FIXING IT UNTIL IT IS
Replied by Max Headroom on topic Jimny M13A Magnecor leads
Interesting Sniper, thanks for researching this and posting the details here [smiley thumbs-up needed here]
IF IT AINT BROKE, KEEP FIXING IT UNTIL IT IS
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 1760
- Thank you received: 332
- Points: 7150.00
-
06 Nov 2018 10:43 #197385
by yakuza
Norway 2005 Jimny M16A VVT, 235 BFG MT, 2" Trailmaster, ARB rear lck, 17%/87% high/low gears.
Replied by yakuza on topic Jimny M13A Magnecor leads
I think they are all the same on all coil on plug suzuki 1.6 and 1.3 engines. i have used a G16 Baleno 99 coil on my 05 m13a and i am pretty sure i used the same leads.
Norway 2005 Jimny M16A VVT, 235 BFG MT, 2" Trailmaster, ARB rear lck, 17%/87% high/low gears.
Please Log in or Create an account to join the conversation.
- jim
- Topic Author
- Visitor
-
Public
06 Nov 2018 11:17 #197387
by jim
Replied by jim on topic Jimny M13A Magnecor leads
Excellent thank you. An early Xmas present for the jimny I think.
Please Log in or Create an account to join the conversation.
Time to create page: 0.103 seconds