×
Search (23 Feb 2018)

A trial enhanced search facility has been enabled. Please use the Google Custom Search above.

× A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Jimny gear trouble

More
09 Oct 2018 17:49 #196599 by Leese
Jimny gear trouble was created by Leese
Hi, I have a jimny 2007 however the gears are not working, when some does it falls out of gear. We removed the lever and I see a plastic thing about half inch high (see pic) it is broken. However I am being told that something is missing. I am new to Jimmy so can someone tell me if there is actually something else that should be in there and if so what is it called so I can shop around.
Attachments:

Please Log in or Create an account to join the conversation.

More
09 Oct 2018 18:07 #196601 by mlines
Replied by mlines on topic Jimny gear trouble
Does this help?


Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Attachments:

Please Log in or Create an account to join the conversation.

More
09 Oct 2018 20:22 #196606 by Leese
Replied by Leese on topic Jimny gear trouble
I figured out what it is I need, is just to source it now. It's a GEAR SHIFTER LINKAGE BUSH

Please Log in or Create an account to join the conversation.

Moderators: funkyjimnyooky_123
Time to create page: 0.106 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.