×
Search (23 Feb 2018)

A trial enhanced search facility has been enabled. Please use the Google Custom Search above.

× A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Snorkel template

More
03 Oct 2018 16:02 #196476 by Probablynotfrank
I'm new, so this is my first post! Was wondering if anyone had a template for the long jimny bits snorkel and would be willing to send me it? Bought a second hand snorkel for cheap, just no template.

Please Log in or Create an account to join the conversation.

  • Lambert
  • Lambert's Avatar
  • Away
  • Moderator
  • Moderator
  • The quickest Jimny in Harrogate...(that I own)
More
04 Oct 2018 04:05 #196486 by Lambert
Replied by Lambert on topic Snorkel template
Be aware that some people have used the provided template and it hasn't been perfectly accurate. Making one with some card from the actual snorkel isn't difficult if you have the skills to attempt fitting a snorkel yourself.

It's not a Jimny. It's my Jimny

Mooo said Ermintrude (black)
Boing said Zebedee (blue)

Please Log in or Create an account to join the conversation.

More
04 Oct 2018 07:57 #196491 by Probablynotfrank
Replied by Probablynotfrank on topic Snorkel template
I just need to know where the hole for the snorkel goes as it's a solid bit of Plastic into the air box, and I'd presume it has to be quite accurate? The rest of the holes for bolts I could figure out

Please Log in or Create an account to join the conversation.

More
04 Oct 2018 14:55 #196495 by jackonlyjack
Replied by jackonlyjack on topic Snorkel template
remove inner arch liner take the part off the inner wing that connects to air box
take out air filter roll up some card push it from air box out to the wing use a scribe/marker pen
where your rolled up tube touches the wing best guess at central point or remove wing to make pilot hole
then use a hole saw
The following user(s) said Thank You: Lambert

Please Log in or Create an account to join the conversation.

Moderators: funkyjimnyooky_123
Time to create page: 0.069 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.