BigJimnyMeet (North) 2024 (12 Jan 2024)
14th July 2024
Parkwood Nr. Leeds
Click HERE for details
Hand brake cable lever
- Iaitoo
- Topic Author
- Visitor
-
Public
How is the cable connected to the lever?
Replacing the cables, so I need to get them loose. My neck is killing me, and I can't fiddle to much with it before the pain is to hard to bare.
Tried looking at it, and didn't see any obvious way to get them off, bit rusty and dirty up under there
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.
- Mraz
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
- Iaitoo
- Topic Author
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
- MadsV
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
- Iaitoo
- Topic Author
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
- rappey
- Visitor
-
Public
Do I not take the whole thing? I just want the two wires to the break. Because I have new ones. The rest of the mechanism I will not be joking with only wires from the drum and forward. The picture is from the wrong car I think. Think it's a vitara.
Please Log in or Create an account to join the conversation.
- MadsV
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.
- Iaitoo
- Topic Author
- Visitor
-
Public
Busta wrote: Slacken the cable tension off. Pull the outer cables back and down, out of the bracket. Turn the inner cable 90 degrees and slide the end downwards out of the bracket.
Thanks. It was the pull back and down part I was wondering about They were rusted stuck... But everything is removed now
Please Log in or Create an account to join the conversation.