-
Forum
-
Suzuki Jimny
-
Jimny Technical
-
Exhaust help please
×
BigJimnyMeet 2024
14th July 2024
Parkwood Nr. Leeds
Booking now open - EARLY BIRD DISCOUNTED PRICE
Exhaust help please
-
rayz_x
-
Topic Author
-
Visitor
-
Public
26 Feb 2018 12:26 #189704
by rayz_x
The fitting welded to my exhaust mid section has broken off and I was going to replace it. I asked the Suzuki dealer and they want £256.00. It's just a straight through pipe with a few bends. They are on e-bay for £29 to about £45 but difficult to tell quality. I may ask Suzuki what the supply only price is.
I put a new back box on recently and the bolts for that go straight through so no problem that end. What is the front end flexible joint like? Is that a separate part to buy if it needs replacing? Is it welded to either the Cat end or the rear pipe section?
Any advice or recommendations appreciated.
Ray
Please Log in or Create an account to join the conversation.
Less
More
-
Posts: 2906
-
Thank you received: 650
-
Points: 8431.00
-
-
-
-
26 Feb 2018 19:25 #189713
by jackonlyjack
The joints are welded the one to cat has special bolts with springs
And a wire mesh conical thing that allows for movement and sealing
Please Log in or Create an account to join the conversation.
Less
More
-
Posts: 6241
-
Thank you received: 1446
-
Points: 14388.00
-
-
-
-
-
-
26 Feb 2018 20:24 #189715
by mlines
Go for the Ebay ones, just the same but a fraction of the price
One word of caution however, the wire mesh sealing ring on most Ebay ones is the wrong size (difficult to seal) either buy the proper one from Suzuki or re-use the old one.
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
-
Forum
-
Suzuki Jimny
-
Jimny Technical
-
Exhaust help please
Time to create page: 0.088 seconds