BigJimnyMeet (North) 2024 (12 Jan 2024)
14th July 2024
Parkwood Nr. Leeds
Click HERE for details
problem locating switched accessory wire
- kelky7777
- Topic Author
- Visitor
-
Public
So far I've located
ground = black, also black on aftermarket
constant 12 v = white, yellow on AM
illumination = red / yellow, orange on AM
the red yellow is at 12v when the lights are turned on and 0 when off, so must be the illumination wire.
I can't find the switched accessory wire, all other wires are at 0 when ignition set to accessories. Does anyone know the colour code for that one? This is on the 2005 version
Please Log in or Create an account to join the conversation.
- jackonlyjack
- Offline
- Platinum Member
-
Registered
- Posts: 2906
- Thank you received: 650
- Points: 8431.00
Please Log in or Create an account to join the conversation.
- Posts: 8787
- Thank you received: 1755
- Points: 36118.00
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Please Log in or Create an account to join the conversation.
- fedriks
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
- kelky7777
- Topic Author
- Visitor
-
Public
jackonlyjack wrote: Did it come with ISO lead ?
the new unit came with 2 connecters, with the plugs for the new unit on 1 end and a bunch of wires on the other, one connector for the speakers and one for power related, the colour coding for that is pretty straightforward I think.
Whats confusing is there should be an accessory wire coming from the car that shows 12v when the key is in accessory position but none of the remaining wires gives a reading.
Please Log in or Create an account to join the conversation.
- kelky7777
- Topic Author
- Visitor
-
Public
11/60 wrote: If it did then there is an autoleads adapter from a Honda accord that works. Pc2-68-4
I did consider an adapter off ebay but wanted it done today so I cut the wires too connect them direct to the new connectors
Please Log in or Create an account to join the conversation.
- kelky7777
- Topic Author
- Visitor
-
Public
fedriks wrote: Hi Kelky777 the connector is this?
Hi, yes I think so, will go get mine and check.
Please Log in or Create an account to join the conversation.
- kelky7777
- Topic Author
- Visitor
-
Public
kelky7777 wrote:
fedriks wrote: Hi Kelky777 the connector is this?
Hi, yes I think so, will go get mine and check.
yes, thats the one, thanks
Please Log in or Create an account to join the conversation.
- kelky7777
- Topic Author
- Visitor
-
Public
There is a small gap around the unit so on the look out for a facia, think I saw some on ebay. that might do the job
Please Log in or Create an account to join the conversation.