Off set 15" steel wheels

Halford wrote: Better hurry as stock minus 3 now, just ordered to add to my existing rear rims? thought I had better whilst they're available.

Thanks Dave, the credit card is now in the airlock, please step into the airlock Dave
Dave

Hal

Check they are the same as the one you have Before you do anything with them my front wheels are different to my rear ones

Thanks Daniel
they will be slightly different as the 2 I've got on the rear are gray and these are black
but not bothered and was concerned they were becoming extinct as they're hard to get hold off.


that C5 looks like it actually does have these rims on

Oh OK , yeah c5 looks a bit scary

Yet they have the same offset

Save 4 for me I get pad tomorrow and I've wanted a set of -30 in black for months. What wheel nuts are they Daniel30 I like that they cover the ends of the stud threads

Daniel30 wrote: Did you just hijack my link Dave?

No? I just made your link appear within the fred...

S Mark wrote: Save 4 for me I get pad tomorrow and I've wanted a set of -30 in black for months. What wheel nuts are they Daniel30 I like that they cover the ends of the stud threads

You'll have to speak nicely to JimnyBits...

I took the original Jimny wheels, cut the center, welded it the other way around, welded the valve hole shut and made a new hole. I gained about 50mm.

S Mark wrote: Save 4 for me I get pad tomorrow and I've wanted a set of -30 in black for months. What wheel nuts are they Daniel30 I like that they cover the ends of the stud threads

Got the nuts from jimnybits and the black covers off ebay think they were 19mm

boby13 wrote: I took the original Jimny wheels, cut the center, welded it the other way around, welded the valve hole shut and made a new hole. I gained about 50mm.

Some people are just to clever!! Boby13 think you need some bigger tyres

Halford wrote: just ordered to add to my existing rear rims? thought I had better whilst they're available.

Hal

Wahay, nice one. Did you get a spare Ie. three?

Daniel30 wrote:

boby13 wrote: I took the original Jimny wheels, cut the center, welded it the other way around, welded the valve hole shut and made a new hole. I gained about 50mm.

Some people are just to clever!! Boby13 think you need some bigger tyres

sometimes I wish I had bigger tyres Daniel30 haha