×
BigJimny Meet 2019 (17 May 2019)

BigJimny Meet and off-road driving day



20TH OCTOBER 2019

NOW BOOKING - CLICK HERE


See HERE for details - See HERE for discussion

× A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the
logo.[/size][/color][/b]

Mild 'Preventative' Off-roading Mods for Gen 4

More
25 May 2019 10:18 #208915 by jackonlyjack
I needed one quick so I could compete in a RTV next day some 6mm plate and an old socket

Found a socket that fit into chassis cross member
Made a cardboard template, welded socket on a few bolts.
Been recovered with it
Attachments:
The following user(s) said Thank You: Guy 2, stiffsteve204me

Please Log in or Create an account to join the conversation.

More
26 May 2019 11:23 - 26 May 2019 11:27 #209003 by Guy 2
Maybe a 'Bridge-too-far' at the moment, Andy!

But I like your ingenuity jackonlyjack.
Last edit: 26 May 2019 11:27 by Guy 2. Reason: Correction

Please Log in or Create an account to join the conversation.

More
28 May 2019 16:34 #209131 by Guy 2
Received the following reply from Jimnybits today:

"To be honest, nearly all the Gen 3 parts are done for the Gen 4 model, its just a case of finishing and tidying up admin of the parts (custom made cardbaord boxes, adding SKU's) etc etc getting photos etc etc
so nearly all the gen 3 parts are (in slight variations) done for the Gen 4

so hopefully the next month they will be rolling out

yours

Rus"


Good news, but I take this to mean that there is nothing that wasn't previously available in the offing, and that any problems Bigjimny Forum members may have had in the past (very few, I suspect, but see jackonlyjack's difficulty cleaning his front diff guard) will probably persist with the Gen 4?
The following user(s) said Thank You: Soeley, stiffsteve204me

Please Log in or Create an account to join the conversation.

More
28 May 2019 17:55 #209135 by Daniel30
Nature of the beast really make the diff guards with larger holes for cleaning then you make them weaker, I normally just get the jet washer in them :)

Please Log in or Create an account to join the conversation.

Moderators: funkyjimnyooky_123
Time to create page: 0.060 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.