×
BigJimnyMeet (North) 2024 (12 Jan 2024)
BigJimnyMeet 2024
14th July 2024
Parkwood Nr. Leeds
14th July 2024
Parkwood Nr. Leeds
Booking now open - Discount for additional vehicles
Click HERE for details
Click HERE for details
×
A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
trailmaster kit
29 Oct 2018 06:28 - 29 Oct 2018 06:32 #197139
by X8GGY
Replied by X8GGY on topic trailmaster kit
They are trailmaster's version of extended bump stops -
The plastic discs just above the brake hose in the above photo... They bolt to the top of the spring seat cones on the front axle, at the bottom of the springs where the bump stop lands... OP has referred to it as the wishbone rather than the radius arm. although the spring is actually on the axle.
The two kits I've fitted have not had them included, they are a new addition, so I can't comment on whether they catch or not?
The plastic discs just above the brake hose in the above photo... They bolt to the top of the spring seat cones on the front axle, at the bottom of the springs where the bump stop lands... OP has referred to it as the wishbone rather than the radius arm. although the spring is actually on the axle.
The two kits I've fitted have not had them included, they are a new addition, so I can't comment on whether they catch or not?
Please Log in or Create an account to join the conversation.
29 Oct 2018 07:21 - 29 Oct 2018 07:26 #197143
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Re:trailmaster kit
I have fitted them on three jimnys. They were all fine and I cannot see how they would catch anyway. I would look to see if the springs are seated correctly at both ends.
Sent from my Pixel 2 XL using Tapatalk
Sent from my Pixel 2 XL using Tapatalk
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
Time to create page: 0.108 seconds