Vehicles (17 Jan 2019)

You can now add the vehicles you own to your profile as little icons that appear in your profile and alongside your posts.
This is a bit of an experiment. Take a look under the "REWARDS" menu across the top of the screen for the vehicles "ADD/MODIFY" option.
Let me know how you get on.

× A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the

Things to replace before under-sealing

  • Posts: 19
  • Thank you received: 1
  • Points: 0.00
24 Oct 2018 10:55 #196999 by bowji john
Good morning All

Forgive me if this has been covered ad nauseum before but here goes .....

Jimny due for MOT
I want to underseal the car once MOT gives it an OK
Also want to take opportunity to do a 2" lift

I do not want to cover such things as engine/suspension mounts in gunk only to find that they need replacing down the line

In addition to the basic 2" kit, what other bits should I consider replacing before under sealing the whole lot?

Thanks in advance


Please Log in or Create an account to join the conversation.

  • Posts: 515
  • Thank you received: 83
  • Points: 194.00
  • Gen 3 Jimny
03 Nov 2018 08:24 #197266 by Bosanek
The basic principle is that no movable parts in the underbody should be sprayed over. Examples are rear brake cables, front vacuum pipes, suspension joints and bushes, wiring connectors etc.

So make the effort to properly temporarily wrap/protect such parts before spraying, and then spray.

Please Log in or Create an account to join the conversation.

Moderators: funkyjimnyooky_123
Time to create page: 0.044 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.