×
BigJimnyMeet (North) 2024 (12 Jan 2024)


BigJimnyMeet 2024

14th July 2024
Parkwood Nr. Leeds

Booking now open - EARLY BIRD DISCOUNTED PRICE

Click HERE for details

× A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the
logo.

Help with bypassing the vacum system.

  • gazert
  • Topic Author
  • Visitor
  • Visitor
    Public
23 Nov 2010 19:21 - 23 Nov 2010 19:34 #6378 by gazert
I need some expert help from my more knowledgable jimny pals,

I have replaced the vacum hubs with AVM manual freehubs.
I knew this would make the green light on the dash flash.


As I have the push button 4L system I now have to fool the system into thinking that the vacum hubs are engaged.
Can I re route the vacum pipes to fool the sensor or is the little vacum switch with the filter able to be shorted to fool the sensors?
Help please.

Ta in advance,
Gaz

Sorry I should have put this in tech.
If anyone can move it to tech please do so.
Last edit: 23 Nov 2010 19:34 by gazert.

Please Log in or Create an account to join the conversation.

  • JimBru
  • Visitor
  • Visitor
    Public
23 Nov 2010 19:43 #6379 by JimBru
Replied by JimBru on topic Re: Help with bypassing the vacum system.
just block the pipes that come away from the vacum solinoids, thats all I have done. I put a nicely fitting screw into the tubes and taped them up.

Please Log in or Create an account to join the conversation.

  • gazert
  • Topic Author
  • Visitor
  • Visitor
    Public
23 Nov 2010 19:46 #6380 by gazert
Replied by gazert on topic Re: Help with bypassing the vacum system.
Do you have the push button 4L system?

Please Log in or Create an account to join the conversation.

  • JimBru
  • Visitor
  • Visitor
    Public
24 Nov 2010 08:18 #6395 by JimBru
Replied by JimBru on topic Re: Help with bypassing the vacum system.
no mate the stick type system, I thought they all worked in the same way? apologies if they don't

Please Log in or Create an account to join the conversation.

  • 4wheelers
  • Visitor
  • Visitor
    Public
24 Nov 2010 09:21 #6397 by 4wheelers
Replied by 4wheelers on topic Re: Help with bypassing the vacum system.

gazert wrote: Do you have the push button 4L system?

I have the push button 4wd selector. The solinoids and pipes are the same as the models with selector stick. Block the pipes at the main solinoid on the drivers side under the bonnet and all your flashing light problems will go away. Jamie showed me what to do as his is the same set up. Two screws are all you need to block the flexible pipes. I think they are about M5.

Please Log in or Create an account to join the conversation.

  • oxford_bloke
  • Visitor
  • Visitor
    Public
24 Nov 2010 13:52 #6403 by oxford_bloke
Replied by oxford_bloke on topic Re: Help with bypassing the vacum system.
can you not get into the dashboard console and remove the bulb? then you can remove all the unwanted bits.

tom

Please Log in or Create an account to join the conversation.

  • adamjimny
  • Visitor
  • Visitor
    Public
24 Nov 2010 14:00 #6404 by adamjimny
Replied by adamjimny on topic Re: Help with bypassing the vacum system.
because his is button operated it wont go in 4l if its not fooled. how aboubt creating pressure when engaged by blocking it therefore fooling it?

Please Log in or Create an account to join the conversation.

  • gazert
  • Topic Author
  • Visitor
  • Visitor
    Public
24 Nov 2010 16:47 #6417 by gazert
Replied by gazert on topic Re: Help with bypassing the vacum system.
Tom,

Normally I wud but unless the system thinks the hubs are engaged it won't allow me to go into 4 low.

Please Log in or Create an account to join the conversation.

  • adamjimny
  • Visitor
  • Visitor
    Public
24 Nov 2010 16:58 #6418 by adamjimny
Replied by adamjimny on topic Re: Help with bypassing the vacum system.
its cos its all electronic. id get a manual transfer box=problem sorted they come cheap

Please Log in or Create an account to join the conversation.

  • gazert
  • Topic Author
  • Visitor
  • Visitor
    Public
24 Nov 2010 17:04 - 24 Nov 2010 17:05 #6419 by gazert
Replied by gazert on topic Re: Help with bypassing the vacum system.
Thanks everyone
Last edit: 24 Nov 2010 17:05 by gazert.

Please Log in or Create an account to join the conversation.

  • gazert
  • Topic Author
  • Visitor
  • Visitor
    Public
25 Nov 2010 10:32 #6461 by gazert
Replied by gazert on topic Re: Help with bypassing the vacum system.
tWas so easy thankyou all!
It works fine now!!!

Please Log in or Create an account to join the conversation.

  • gazert
  • Topic Author
  • Visitor
  • Visitor
    Public
03 Dec 2010 18:36 #6995 by gazert
Replied by gazert on topic Re: Help with bypassing the vacum system.
Well my 4x4 system has been ok for a week.
Today the light started flashing!!!
I presume it has split a hose or an electrical fault!!

Doing my nut in now!

Please Log in or Create an account to join the conversation.

Time to create page: 0.111 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.

We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.