×
Search (23 Feb 2018)

A trial enhanced search facility has been enabled. Please use the Google Custom Search above.

× A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the
logo.[/size][/color][/b]

Wheel Arch Flare Seal

More
01 Jun 2018 21:51 - 01 Jun 2018 21:52 #193133 by Max Headroom
OK I have hunted high and low for this stuff - it looks like a rubber extrusion and on my neighbour's Jimny it feels flexible like rubber, but mine has gone hard and brittle :ohmy: and is now falling out of the gap and looks very unsightly.
I'll bet it comes on a roll that is simply cut to length.

Please can anyone help me find a source of this rubber strip that goes between the body and the wheel arch flares?



IF IT AINT BROKE, KEEP FIXING IT UNTIL IT IS
Attachments:
Last edit: 01 Jun 2018 21:52 by Max Headroom.

Please Log in or Create an account to join the conversation.

More
01 Jun 2018 23:05 #193134 by Daniel30
Replied by Daniel30 on topic Wheel Arch Flare Seal
Speak to Martin I'm sure he could order some

Please Log in or Create an account to join the conversation.

More
02 Jun 2018 05:40 #193140 by Lambert
Replied by Lambert on topic Wheel Arch Flare Seal
You are probably going to struggle with a colour match if you go generic. Daniel is right, talk with Martin of this parish and he should be able to get you sorted.

It's not a Jimny. It's my Jimny

Mooo said Ermintrude (black)
Boing said Zebedee (blue)
The following user(s) said Thank You: Max Headroom

Please Log in or Create an account to join the conversation.

More
02 Jun 2018 07:19 #193142 by Riccy
Replied by Riccy on topic Wheel Arch Flare Seal
ala-plast.com/uszczelkamontazowa.html

That stuff, athough there may be a more local supplier (Martin) ;-)

J999 MNY, M16 VVT, R7me gbox & Rocklobster,
31x10.5r15 Cooper STT, 2x ARB Lockd' 3.9 diffs & twin compressor,
6.5" total lift, Zookbob HD steering shock, Ignis recaro's
Custom bar & arches, rocksliders & guards,
Snorkel, K&N, 13500lb Winchmax, Buzzweld, etc, etc

Plus ULYSSES (06' trayback project)
The following user(s) said Thank You: Max Headroom

Please Log in or Create an account to join the conversation.

More
02 Jun 2018 18:22 #193157 by Max Headroom
Replied by Max Headroom on topic Wheel Arch Flare Seal
Hey thanks chaps!

Its a good start!
Yes, mine is kind of coloured by the looks of it - but to be honest either a pale gold or silver colour - or even light grey would do.

Thanks I'll give Martin a buzz and see what he says.


IF IT AINT BROKE, KEEP FIXING IT UNTIL IT IS

Please Log in or Create an account to join the conversation.

More
02 Jun 2018 20:29 #193161 by mlines
Replied by mlines on topic Wheel Arch Flare Seal
Yep, I can get them.

Standard part in the correct colour complete with adhesive integrated into it.

I have a black one in stock but would have to order in the correct colour for you.

Probably just over £12 each but would have to check specifically for your colour

Martin

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

More
03 Jun 2018 05:20 - 03 Jun 2018 05:21 #193164 by Max Headroom
Replied by Max Headroom on topic Wheel Arch Flare Seal
Hi Martin

thank you for getting back to me here.

The colour (I think) is called Mild Silver, but I will confirm this by tonight.
(You may know of it; in some daylight the paintwork looks silver, but in other light it looks like a very, very pale gold.)

I'm away at the moment but will be back tonight to confirm this with the paint-code if needed.


IF IT AINT BROKE, KEEP FIXING IT UNTIL IT IS
Last edit: 03 Jun 2018 05:21 by Max Headroom.

Please Log in or Create an account to join the conversation.

More
03 Jun 2018 08:05 #193165 by mlines
Replied by mlines on topic Wheel Arch Flare Seal
PM me you VIN number

Sent from my Pixel 2 XL using Tapatalk

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

More
03 Jun 2018 21:31 #193181 by Max Headroom
Replied by Max Headroom on topic Wheel Arch Flare Seal
PM Sent


IF IT AINT BROKE, KEEP FIXING IT UNTIL IT IS

Please Log in or Create an account to join the conversation.

More
07 Jun 2018 07:15 #193269 by mlines
Replied by mlines on topic Wheel Arch Flare Seal
I have replied, £13.75 plus £2.20 p&p

Martin

Sent from my Pixel 2 XL using Tapatalk

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
The following user(s) said Thank You: Max Headroom

Please Log in or Create an account to join the conversation.

More
07 Jun 2018 22:00 - 07 Jun 2018 22:41 #193280 by Max Headroom
Replied by Max Headroom on topic Wheel Arch Flare Seal
DONE!
Where do I pay?

A big 'THANK YOU' for chasing these down, Martin


IF IT AINT BROKE, KEEP FIXING IT UNTIL IT IS
Last edit: 07 Jun 2018 22:41 by Max Headroom.

Please Log in or Create an account to join the conversation.

Moderators: funkyjimnyooky_123
Time to create page: 0.092 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.