×
BigJimnyMeet (North) 2024 (12 Jan 2024)


BigJimnyMeet 2024

14th July 2024
Parkwood Nr. Leeds

Booking now open - EARLY BIRD DISCOUNTED PRICE

Click HERE for details

× A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the
logo.

What did the postman bring today

  • OlaGB
  • Visitor
  • Visitor
    Public
07 Jan 2019 19:09 #200139 by OlaGB
Replied by OlaGB on topic What did the postman bring today

Riccy wrote: Some shiny 'Headers' (or an exhaust manifold as I prefer to call it, being British)...



B) B) :evil:


Nice!
Is that the wmd4x4 header?

Please Log in or Create an account to join the conversation.

More
07 Jan 2019 19:13 - 07 Jan 2019 19:14 #200140 by Jezz
Well not exactly the postman. But this arrived over the weekend.


It's been fettled just a tad.
Attachments:
Last edit: 07 Jan 2019 19:14 by Jezz. Reason: spelling

Please Log in or Create an account to join the conversation.

  • Riccy
  • Riccy's Avatar
  • Offline
  • Banned
  • Banned
    Registered
  • J999 MNY Bashing around Carlisle
More
07 Jan 2019 19:42 #200143 by Riccy

OlaGB wrote: Nice!
Is that the wmd4x4 header?


Yes thats the one, looks pretty well made at the price. Seller wanted me to take pics of the standard one to make sure this was going to fit. Arrived quickly as well. Will take a few measurements and check it against whats needed.


Jezz... New project?

J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp

Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...

www.youtube.com/user/riclemus

Please Log in or Create an account to join the conversation.

  • OlaGB
  • Visitor
  • Visitor
    Public
07 Jan 2019 20:46 #200148 by OlaGB
Replied by OlaGB on topic What did the postman bring today

Riccy wrote:

OlaGB wrote: Nice!
Is that the wmd4x4 header?


Yes thats the one, looks pretty well made at the price. Seller wanted me to take pics of the standard one to make sure this was going to fit. Arrived quickly as well. Will take a few measurements and check it against whats needed.


Jezz... New project?


Been drooling on several of theire products, but the shipping price in theire store is mental! Often as expensive as the product.
Did you get a better quote through direct contact?

Please Log in or Create an account to join the conversation.

  • Riccy
  • Riccy's Avatar
  • Offline
  • Banned
  • Banned
    Registered
  • J999 MNY Bashing around Carlisle
More
08 Jan 2019 18:57 #200192 by Riccy
[quote="OlaGB" post=200148

Been drooling on several of theire products, but the shipping price in theire store is mental! Often as expensive as the product.
Did you get a better quote through direct contact?[/quote]

Lets just say it cost me less than the non-stainless one from Australia would have including postage. They Kindly marked it as a sample and included a invoice for $30 USD, which meant customs in this country didn't charge me import tax :-)

J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp

Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...

www.youtube.com/user/riclemus

Please Log in or Create an account to join the conversation.

  • OlaGB
  • Visitor
  • Visitor
    Public
08 Jan 2019 19:46 #200198 by OlaGB
Replied by OlaGB on topic What did the postman bring today

Riccy wrote: [quote="OlaGB" post=200148

Been drooling on several of theire products, but the shipping price in theire store is mental! Often as expensive as the product.
Did you get a better quote through direct contact?


Lets just say it cost me less than the non-stainless one from Australia would have including postage. They Kindly marked it as a sample and included a invoice for $30 USD, which meant customs in this country didn't charge me import tax :-)[/quote]

Sounds familiar :laugh:

I like the entire exhaust they sell, also the sound in it, but $516 just in shipping...

Please Log in or Create an account to join the conversation.

More
09 Jan 2019 21:00 #200280 by Max Headroom
Riccy I may have missed something here but the exhaust manifold - was that custom made for you?


IF IT AINT BROKE, KEEP FIXING IT UNTIL IT IS

Please Log in or Create an account to join the conversation.

  • Riccy
  • Riccy's Avatar
  • Offline
  • Banned
  • Banned
    Registered
  • J999 MNY Bashing around Carlisle
More
10 Jan 2019 07:13 #200301 by Riccy

Max Headroom wrote: Riccy I may have missed something here but the exhaust manifold - was that custom made for you?


No, its a standard thing that company sells. They did want me to send pics of mine over, but that was to check that they are the same for left hand drive as for right hand drive.

As Ola says, its worth contacting them for discount on the shipping first and they make a very nice full exhaust as well.

Here is a link to the sellers listing:
www.aliexpress.com/item/WMD-Non-turbo-Ex...1.0.0.3da24c4dM60v2A

J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp

Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...

www.youtube.com/user/riclemus

Please Log in or Create an account to join the conversation.

More
10 Jan 2019 17:10 #200346 by Max Headroom
That's a real bargain IMHO!
...And this puts things into perspective - during the week I was given/gifted a special manifold for my prewar MG. Nothing as shiny and dramatic, but these cost in the region of £500 :S



IF IT AINT BROKE, KEEP FIXING IT UNTIL IT IS
Attachments:
The following user(s) said Thank You: Dirtbird

Please Log in or Create an account to join the conversation.

More
14 Jan 2019 13:25 #200722 by Dirtbird
Should help level the Jimny. 2 inch lift kit . See what it does . While Im on did i read on this forum that some of the lads put the big springs on the bac and the smalls on the front or am I sleep deprived????

Later lads.




Heavy Duty Transfer Box Brackets, 2-inch Black Raptor lift kit, caster adjusters, Rust removed and stich welded new sections. Galvanised Chassis. Body,Engine,transmission swap. Anti Rollbar Roll / Sway Bar / DAVES ARB disconnect kit.Osram Night Breaker Head light mod and white 501 led side lights.
Attachments:

Please Log in or Create an account to join the conversation.

  • Lambert
  • Lambert's Avatar
  • Offline
  • Moderator
  • Moderator
    Registered
  • The quickest Jimny in Harrogate...(that I own)
More
14 Jan 2019 13:57 #200723 by Lambert
Not quite. Tallest front. Unless you're using a pair of standard front to put a bit of a lift into the back. But you have a lift set so tallest in the front and the shorter of the rear ones on the passenger side to avoid Jimny lean.

Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
The following user(s) said Thank You: Dirtbird

Please Log in or Create an account to join the conversation.

More
14 Jan 2019 14:07 #200726 by Dirtbird
Nice one Lambert .

Heavy Duty Transfer Box Brackets, 2-inch Black Raptor lift kit, caster adjusters, Rust removed and stich welded new sections. Galvanised Chassis. Body,Engine,transmission swap. Anti Rollbar Roll / Sway Bar / DAVES ARB disconnect kit.Osram Night Breaker Head light mod and white 501 led side lights.

Please Log in or Create an account to join the conversation.

Time to create page: 0.257 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.

We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.