×
BigJimnyMeet (North) 2024 (12 Jan 2024)
BigJimnyMeet 2024
14th July 2024
Parkwood Nr. Leeds
14th July 2024
Parkwood Nr. Leeds
Booking now open - Discount for additional vehicles
Click HERE for details
Click HERE for details
×
A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
URGENTLY REQUIRED - PLEASE READ
05 Aug 2010 13:03 #4066
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
URGENTLY REQUIRED - PLEASE READ was created by mlines
You may be aware of the difficulties I have had in procuring the Front Wheel Bearing kits recently.
I have been investigating a number of ways of getting hold of them and I think I may have found a way forward, this involves commissioning my own production run
(Not a cheap exercise I can tell you, but the end product is significantly cheaper!)
However I need a couple of bits to help with the production estimating. I need the oil seal and c-clips that came with the original kits. It does not matter what condition they are in, even broken, rusty ones will do. Unfortunately I swept my garage floor recently which removed all these old bits that I "stored" on the floor.
Can you help, all expenses paid etc.
Really urgently needed.
Thanks
Martin
I have been investigating a number of ways of getting hold of them and I think I may have found a way forward, this involves commissioning my own production run
(Not a cheap exercise I can tell you, but the end product is significantly cheaper!)However I need a couple of bits to help with the production estimating. I need the oil seal and c-clips that came with the original kits. It does not matter what condition they are in, even broken, rusty ones will do. Unfortunately I swept my garage floor recently which removed all these old bits that I "stored" on the floor.
Can you help, all expenses paid etc.
Really urgently needed.
Thanks
Martin
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
05 Aug 2010 14:21 #4070
by JonathonMarshall
Replied by JonathonMarshall on topic Re:URGENTLY REQUIRED - PLEASE READ
when do the binmen come? 
Please Log in or Create an account to join the conversation.
11 Aug 2010 05:41 - 11 Aug 2010 05:41 #4178
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Re:URGENTLY REQUIRED - PLEASE READ
Andy, you mean you didn't order BigJimny parts - shame on you 
Its the main wheel bearing seal and ring I am looking for , not the Kingpins but thanks for the offer.
Martin
Its the main wheel bearing seal and ring I am looking for , not the Kingpins but thanks for the offer.
Martin
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
Time to create page: 0.126 seconds