×
BigJimnyMeet (North) 2024 (12 Jan 2024)


BigJimnyMeet 2024

14th July 2024
Parkwood Nr. Leeds

Booking now open - EARLY BIRD DISCOUNTED PRICE

Click HERE for details

× Sell your bits!
NOTE: This is for members and their private sales/wants.
There are rules that suppliers have to follow (and many of you do follow the rules). However there have been a number of instances recently where "suppliers" have broken the rules.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum

WANTED: URGENTLY

More
08 Dec 2017 20:29 #187183 by mlines
WANTED: URGENTLY was created by mlines
The differential end yoke or complete rear propshaft from either a Jimny or an SJ with 25mm UJ Joints

Part 9 in the picture (or complete propshaft)


Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Attachments:

Please Log in or Create an account to join the conversation.

More
08 Dec 2017 23:48 #187195 by Jezz
Replied by Jezz on topic WANTED: URGENTLY
I've got a complete rear prop down my workshop you can have for postage cost Martin. It came off the blue one from Hastings
you put in the for sale section for a friend a while back that i bought and broke. I'm never going to use it as i don't run jimny props. i'm pretty sure it was all ok. I'll dig it out tomorrow and wrap it up, unless you want to collect or have someone down this way that can grab it and get it to you.

It's been fettled just a tad.

Please Log in or Create an account to join the conversation.

More
09 Dec 2017 06:58 #187198 by mlines
Replied by mlines on topic WANTED: URGENTLY
Jezz

Many thanks, although its urgent as we want to keep driving (We had only just got back on the road when I realised the UJ was binding and then found the yoke damaged) I think Kent it a bit too far for a pickup.

I also dont run Jimny props, mine are SJ props, but the axle-end yoke is the same providing it take the 25mm UJs (which the jimny one does)

To save on postage you could cut the yoke off if you want as I would only throw away the rest of the prop anyway to be honest.

Let me know what I owe you.

Thanks again

Martin

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

More
09 Dec 2017 11:47 #187210 by Jezz
Replied by Jezz on topic WANTED: URGENTLY
pm me a postal address please Martin.

It's been fettled just a tad.

Please Log in or Create an account to join the conversation.

More
09 Dec 2017 11:55 #187212 by Jezz
Replied by Jezz on topic WANTED: URGENTLY
It's ok, found it.

It's been fettled just a tad.

Please Log in or Create an account to join the conversation.

More
09 Dec 2017 13:08 - 09 Dec 2017 13:09 #187214 by Jezz
Replied by Jezz on topic WANTED: URGENTLY
Posted,
You can have that on me Martin, As a thank you for and small contribution for you running the forum.

It's been fettled just a tad.
Last edit: 09 Dec 2017 13:09 by Jezz. Reason: spelling

Please Log in or Create an account to join the conversation.

More
09 Dec 2017 13:11 #187215 by mlines
Replied by mlines on topic Re:RE: WANTED: URGENTLY

Jezz wrote: Posted,
You can have that on me Martin, As a thank you for and small contribution for you running the forum.

Jezz, that's so kind of you, thanks. Now can you make the snow hold off until I fit it :)

Sent from my Nexus 6P using Tapatalk

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

Time to create page: 0.131 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.

We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.